Arcadyan WA9102BAC33 User Manual
Arcadyan WA9102BAC33 User Manual

Arcadyan WA9102BAC33 User Manual

Advertisement

Enterprise WiFi Access Point
This Wireless Enterprise Access Point is compliant with the IEEE 802.11ac
specifications while maintaining full backwards compatibility with the
current 802.11b/g/n standards. 802.11n builds upon previous 802.11
standards by adding MIMO (multiple-input multiple-output) antenna
technology. This device supports 3x3 MIMO, which uses multiple transmitter
User Manual 
and receiver antennas, to deliver data throughputs of up to 1300 Mbps.
WA9102BAC33 
IEEE 802.11ac is the new addition of the IEEE 802.11 standards, running at
5 GHz band type and co-existing with the 802.11n network. It delivers wide
bandwidth of up to 80 MHz, and reliable high data rates of up to 1.3 Gbps.
 
The Passive Power-over-Ethernet (PoE) is also embedded with the Enterprise
Access Point for convenient power connectivity. Using the PoE serves both
data link and power connection in one cable. It eliminates the need of power
supply, and provides long cable length.
Arcadyan Technology Corporation
This device supports both wired LAN/WAN ports and wireless capabilities.
With the capability of MIMO and delivering gigabit network bandwidth, the
Enterprise Access Point provides sufficient bandwidth to stream HD video,
listen to digital music, play online games, transfer large files, and surf the
Internet simultaneously.
I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WA9102BAC33 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Arcadyan WA9102BAC33

  • Page 1 It eliminates the need of power supply, and provides long cable length. Arcadyan Technology Corporation This device supports both wired LAN/WAN ports and wireless capabilities. With the capability of MIMO and delivering gigabit network bandwidth, the...
  • Page 2: Led Indicators

    LED Indicators Connection Interface     ETH2/ETH1 (Gigabit Ethernet Port) Flashing Gigabit Ethernet Ports (RJ-45) Ethernet connection has been The indicated Gigabit LAN port is  ETH1/ PoE, ETH2 – established. sending or receiving data.  Connect devices on your local area network to these ports (i.e., a PC, hub, switch or IP set top box).
  • Page 3: Wall Mounting

    Device Connectivity Wall Mounting There are two slots on the base of the access point for mounting the device Step 1 - Connect one end of the provided Ethernet cable into the LAN ports on the Wireless Access Point. Then insert the other end of the cable into the on the wall.
  • Page 4: Fcc Statement

    FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject Federal Communication Commission Interference Statement to the following two conditions: (1) This device may not cause harmful This equipment has been tested and found to comply with the limits for a interference, and (2) this device must accept any interference received, Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 5 (1) 「經型式認證合格之低功率射頻電機,非經許可,公司、商號或 使用者均不得擅自變更頻率、加大功率或變更原設計之特性及 功能」。 (2) 「低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經 發現有干擾現象時,應立即 停用,並改善至無干擾時方得繼續使用。前項合法通信,指依 電信法規定作業之無線電通信。低功率射頻電機須忍受合法通 信或工業、科學及醫療用電波輻射性電機設備之干擾」。 (3) 「不致造成違反低功率電波輻射性電機管理辦法之所有控制、調 整及開關之使用方法」。 (4) 「對任何可能造成違反管理辦法規定之調整予以警告,或建議由 具有發射機維修專長之技術人員執行或由其直接監督及負責」 。 (5) 「對任何可能造成違反管理辦法之零件(晶體、半導體等)置換之 警告」。 (6) 「電磁波曝露量MPE 標準值1mW/cm2,送測產品實測值為: 0.364322 mW/cm2」。 IX VII...

Table of Contents