Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for MSR ST323C
- Page 1 WIRELESS TEMPERATURE MONITOR Model No.: ST323C 0434 Operation Manual Reading Before Using...
- Page 2 Thank you for purchasing MSR Wireless Temperature Monitor with Remote Monitor. Before you start using this unit, please read this operation manual thoroughly. Contents Introduction …………………………………………………………………. Specification…………………………………………………………………. Safety Note ………………………………………………………………… Components …………………………………………………………………. Product Descriptions ………………………………………………………… Preparation Before Using ……………………………………………………. Operation ……………………………………………………………………..
- Page 3 【INTROUDCTION】 The “Wireless Temperature Monitor” (called device) is a newly innovative medical device intended for remote monitor of the armpit temperature up to 100 hours continuously for patients of 3 years older to adult when they are developing fever. The device consists of two units: the transmitter and the receiver. The transmitter functions as the unit not only to monitor the armpit temperature but also to transmit the temperature measured to the receiver that is remotely located by about 160 feet away.
-
Page 4: Specifications
【Specifications】 Size: Transmitter: 56.95 x 40.64 x 18.41mm Receiver : 72.4 x 23 mm Weight: Transmitter: approx. 11.20g (without battery) Receiver: approx. 41g (without battery) Product Material: Transmitter: ABS Receiver: ABS Type of Batteries: Transmitter: 3V x 1 (CR2032) Receiver: AAA / 1.5V x 2 Transmitter: Approx. - Page 5 【Safey Note】 Warning 1. Before you start using this unit, please read this operation manual thoroughly for the correct methods of usage. 2. This device is not waterproof and must be never submersed in any liquid. 3. Do not drop or disassemble the units. 4.
- Page 6 【Components】 Components in packing Fasten belt Sensor patch Battery for receiver Battery for Transmitter Receiver Transmitter Components assembly...
- Page 7 【Product Descriptions】 Receiver group: Light Indicator Display Battery for Recevier On/Off button Selection button Set button Set button Selection button Year/Month/Date/Time...
- Page 8 Transmitter group: On/Off button Battery for Transmitter Light indicator Sensor Patch Fasten belt Plug to sensor wire Plug to transmitter...
- Page 9 【Preparation Before Using】 Step one: Install battery One CR2032 (3 volt) battery Remove the battery compartment cover Insert one battery in the battery compartment, as indicated by the positive (+) faced up. Replace the battery cover Two AAA (1.5V) batteries Remove the battery compartment cover Insert two batteries in the...
- Page 10 Step one: Connect the patch and fasten belt and transmitter when you use it for temperature monitor Take the fasten belt out Plug the patch and transmitter to both ends of the sensor wire on the fasten belt Fix the fasten belt on the transmitter...
- Page 11 Wear it on the upper arm Peel the cover on the patch and affix the patch on the armpit of the patient. Note: The receiver should be kept with the caretaker remotely.
- Page 12 【Operation】 Receiver Selection Button Transmitter On/Off button Set button (including sensor ) ＊ To activate the I/O button Press the I/O button approx. 3 second to activate this device. The LCD show all segments ＊ To Change ℉/℃ mode (the default is ℃) When the device is activated, press “set”...
Need help?
Do you have a question about the ST323C and is the answer not in the manual?
Questions and answers