Download Print this page

Zhejiang CHINT Instrument & Meter Co., Ltd. DTSU666 Series Quick Operation Manual

Digital three-phase energy meter

Advertisement

Quick Links

                     
Quick operation manual of DTSU666-□series and DSSU666-□series
Thank you for using the products of Zhejiang CHINT Instrument & Meter Co., Ltd. In order to have a
safe and correct use of the instrument, please read this manual carefully and make sure to pay attention to
the following points in use:
This instrument must be installed and maintained by the qualified professionals;
The input signals and auxiliary power supply must be cut off before wiring of the instrument;
Make sure every part of the instrument without voltage by continuously using appropriate
voltage detection device;
The following conditions will lead to the damage or abnormal operation of the device:
Incorrect ratio setting of the instrument;
Out of range of auxiliary power supply、voltage、current、frequency;
Incorrect input polarity of current or voltage;
The terminals are not connected according to the requirements;
1.
Technical parameters
Technical parameters
Measuring network
Voltage
Input
signal
Current
Frequency
DSSU666□and
DTSU666□series
Output
Energy
Quick operation manual
Digital Three-Phase Energy Meter
Rated value
Operating
voltage
Consumption
Resistance
Rated value
Consumption
Resistance
Input range
Display
Active energy
Reactive energy
Active energy
Reactive energy
Energy
measurement
Pulse constant
Table 1
3 phase 3 wire(DSSU666□series)
3 phase 4 wire(DTSU666□series)
3 phase 3 wire
3 phase 4 wire
≤8VA/1W(per phase)
3 phase 3 wire
3 phase 4 wire
<20mΩ(per phase)
Class1
Class 2
Class 0.5S
Class 2
forward、reverse active energy,
four-quadrant reactive energy.
AC 3×380V;
AC 3×400V
AC 3×380V;
AC 3×400V
AC 3×220/380V;
AC 3×230/400V
 1/7 
Page
 
Index
AC 3×380V;AC 3×400V
AC 3×220/380V;AC 3×230/400V
0.7Un—1.2Un
>500kΩ
AC 5(80)A
AC 1.5(6)A
≤1VA(per phase)
45Hz~65Hz
LCD display
resolving power 0.01kWh
resolving power 0.01kvarh
resolving power 0.01kWh
resolving power 0.01kvarh
AC
6400imp/kWh(imp/kvarh)
1.5(6)A
AC
400imp/kWh(imp/kvarh)
5(80)A
AC
6400imp/kWh(imp/kvarh)
1.5(6)A

Advertisement

loading

Summary of Contents for Zhejiang CHINT Instrument & Meter Co., Ltd. DTSU666 Series

  • Page 1 Quick operation manual                         Quick operation manual of DTSU666-□series and DSSU666-□series Digital Three-Phase Energy Meter Thank you for using the products of Zhejiang CHINT Instrument & Meter Co., Ltd. In order to have a safe and correct use of the instrument, please read this manual carefully and make sure to pay attention to the following points in use: ...
  • Page 2: Wiring Instructions

    Quick operation manual                         AC 3×220/380V; 400imp/kWh(imp/kvarh) AC 3×230/400V 5(80)A Supply active、reactive energy optical signal and Pulse signal optocoupler collector open-circuit electrical signal impulse output output, pulse length:80±16ms。 Auxiliary Support MODBUS-RTU communication Consultation, Protocol function Baud rate support 2400bps, 4800bps, 9600bp. Note 1:the other performance index, indoor table reference IEC 62053 - 21 requirements.
  • Page 3: Installation Size

    Quick operation manual                         Figure 5 the settings of the common parameters Installation size Table2 DIN rail for Model Shell size(width×length×depth) mounting DTSU666-□series 126mmx89mmx76mm 35mm DSSU666-□series Figure 6 outside view communication  3/7  Page...
  • Page 4 Quick operation manual                         Factory setting: DL/T 645-2007 protocol, Parity(E.1), Baud Rate(9600bps),Meter Address see lable. The RS485 communication supports DLT 645-2007 protocol or ModBus_RTU protocol, DLT 645-2007 supports read Meter Address, (current) total import active energy, (current) export active Ⅰ Ⅱ energy, (current)quadrants reactive...
  • Page 5 Quick operation manual                         2004H phase 4 wire) Floating Inverse(AB CD) 2006H Floating Inverse(AB CD) Phase-phase voltage, the 2008H unit is V(It is invalid for 3 Floating Inverse(AB CD) phase 3 wire) 200AH Floating Inverse(AB CD) 200CH The data of three phase Floating Inverse(AB CD) current,the unit is A 200EH...
  • Page 6 Quick operation manual                         4024H RESERVED reserved Floating Inverse(AB CD) 4026H RESERVED reserved Floating Inverse(AB CD) (current)negative active 4028H ExpEp Floating Inverse(AB CD) total energy 402AH RESERVED reserved Floating Inverse(AB CD) 402CH RESERVED reserved Floating Inverse(AB CD) 402EH RESERVED reserved Floating Inverse(AB CD) 4030H RESERVED reserved...
  • Page 7 Quick operation manual                         ImpEp,ExpEp,Q1Eq, Energy Ep = E× UrAt×IrAt kvarh Q2Eq,Q3Eq,Q4Eq Note: When Potential Transformer(Pt) is 1, The value of UrAt is 10. Manufacturer:Zhejiang CHINT Instrument&Meter Co.,Ltd. Address:Bridge Industrial Zone,325603 Wenzhou,Zhejiang,China :325603 Technical Support Hotline:0571-56977777-7659 86-15858113737 Quality Complaints:0577-62919999 8008577777 Counterfeit Complaints Hotline:0577-62789987 Website:http://www.chint.com Email:ztyb@chint.com Publication date: May, 2016...

This manual is also suitable for:

Dssu666 series