LDL TECHNOLOGY Tire Watch User Manual

Advertisement

Thank you for buying our tire pressure and temperature monitoring system. With TIRE WATCH you will improve
your performances by optimizing your pressure values and you will get more precise.
A – GENERAL FEATURES
The system consists of 4 to 32 sensors (transmitter), a display (receiver) and a remote control unit (LF Trigger)
which allows you to activate the RF transmission when the vehicle is at stop. To help you inflate your tire, the
display also keeps in memory the maximal pressure and the maximal temperature that every tire achieved during
the race or the session.
Tire Watch Sport enables you to pre-equip up to 32 wheel rims. You can then change your wheels at any time of
the race while keeping the information of pressures and temperatures of the 4 wheels on the vehicle. The display
recognizes "automatically" (after an initial phase of learning) the wheel which was changed.
1 – SYNOPTIC
The sensors constantly measure tire pressure and
temperature and send the informations every seconds
thanks to the Radio Frequency Technology.
Rear right
Front right
LDL TECHNOLOGY COPYRIGHTS
DISPLAY USER MANUAL
TM
TIRE WATCH
RACING
Rear left
www.aimshop.com
Front left
The Display decods and shows in real time the
measured values. The driver is alerted by a light
indicator (led is blinking) and can react before
the tire may place his safety at risk.
1 /8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tire Watch and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LDL TECHNOLOGY Tire Watch

  • Page 1 Tire Watch Sport enables you to pre-equip up to 32 wheel rims. You can then change your wheels at any time of the race while keeping the information of pressures and temperatures of the 4 wheels on the vehicle. The display recognizes “automatically”...
  • Page 2 You can set up and modify the following alert thresholds : High pressure alert for front tires High pressure alert for rear tires Low pressure alert for all the wheels High temperature alert for all the wheels 2 /8 LDL TECHNOLOGY COPYRIGHTS www.aimshop.com...
  • Page 3 (see the chapter C: set your values) To display the T° even in the sequence  short push on Bt2 To come back to the pressure display  short push on Bt2 / or wait the end of the sequence 3 /8 LDL TECHNOLOGY COPYRIGHTS www.aimshop.com...
  • Page 4 To validate the last digit and the on going menu  short push on Bt1. To accede on the following menu  short push on Bt1. To go back to the main mode : (FIG 3)  long push on Bt1. 4 /8 LDL TECHNOLOGY COPYRIGHTS www.aimshop.com...
  • Page 5 FIG 7 – MENU 03 : HIGH PRESSURE THRESHOLD SETTING FOR FRONT TIRES Setting range for front and rear wheels : from 0,1 à 3,5 bar (or 01 to 51 PSI) Maximum pressure alert : Pmax (HI) pre-programmed at 3,5 bar 5 /8 LDL TECHNOLOGY COPYRIGHTS www.aimshop.com...
  • Page 6 FIG 10 – MENU 06 : HIGH TEMPERATURE THRESHOLD SETTING FOR ALL THE WHEELS Setting range : from -19°C to +99°C ( 000 to 210 °F) Maximum temperature threshold alert : Tmax (HI) preprogrammed at 99 °C This threshold will be registered for all the wheels. 6 /8 LDL TECHNOLOGY COPYRIGHTS www.aimshop.com...
  • Page 7 Once the ID has been learned, FL (Front Left) is blinking -> You have to learn on the display the final position of the sensor on the car. Choose the wheel rim set number and Choose the posiiton and validate validate 7 /8 LDL TECHNOLOGY COPYRIGHTS www.aimshop.com...
  • Page 8 If you have to invert one wheel – change rear right wheel with front right wheel, you will have to do the learning again by using force frame button. 8 /8 LDL TECHNOLOGY COPYRIGHTS www.aimshop.com...

Table of Contents