1. Manuals
  2. Brands
  3. RecSol Manuals
  4. Modem
  5. RECSPEED-2021P
  6. Installation manual

RecSol RECSPEED-2021P Installation Manual

Adsl pci nic
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
Recreative Solution
Information & Communication
The Leader of the DIGITOPIA
RECSPEED-2021P   
ADSL PCI NIC
Installation Guide
Fl.6. Hanna B/D 123 kwangjang - Dong, Kwangjin-Gu,Seoul,Korea

Advertisement

Table of Contents
loading

Summary of Contents for RecSol RECSPEED-2021P

  • Page 1 Recreative Solution Information & Communication The Leader of the DIGITOPIA RECSPEED-2021P    ADSL PCI NIC Installation Guide Fl.6. Hanna B/D 123 kwangjang - Dong, Kwangjin-Gu,Seoul,Korea...
  • Page 2 This manual and software described in it are copyrighted with all rights reserved. This manual may not be copied, in whole or in part, without the written consent of RECSPEED-2021P Corporation. RECSPEED-2021P is a trademark of RECSPEED-2021P Corporation. All other product names are trademarks and or registered trademarks of their respective companies.
  • Page 3 RECSPEED-2021P Installation Guide Table of Contents BEFORE YOU START! ........................... 1 STEP 1 – GATHER SYSTEM AND SERVICE CONNECTION INFORMATION ......2 ........................2 YSTEM EQUIREMENTS ..................... 2 ETERMINING PERATING YSTEM ................3 ETERMINING NTERNET ERVICE ROTOCOL ............ 3 ETERMINING...

  • Page 4: Table Of Contents

    RECSPEED-2021P Installation Guide ..........................39 ONNECTOR INOUT APPENDIX B - TROUBLE SHOOTING..................... 40 APPENDIX C - REMOVING RECSPEED-2021P DRIVERS (VER 2.1.0) ........42 95, 98 ..........................42 INDOWS 2000 ............................ 42 INDOWS NT4.0 ..........................43 INDOWS RECSPEED-2021P D 2.1.2)................. 43...
  • Page 5 Before you Start! The RECSPEED-2021P Installation Guide tells you everything you need to know to install and use the RECSPEED-2021P ADSL modem card. This guide is designed to walk you through the installation of RECSPEED-2021P ADSL card and drivers, and then through the establishment of an Internet service connection.
  • Page 6 Step 1 – Gather system and service connection Information System Requirements Make sure your PC system meets ALL of the following minimum hardware and software requirements: Hardware: IBM PC/AT or compatible Pentium 100Mhz or faster 30Mbytes available hard disk space or more 2x CD-ROM drive or better 32Mbyte available system memory or more Software: Your Operating System must be one of the following:...
  • Page 7 Determining Your Internet Service Protocol Your Internet service protocol will be one of the following. Contact your Internet Service Provider (ISP) if you are unsure of your service type. RFC 1483 $ Bridged Ethernet over ATM RFC 2364 $ Point-to-Point Protocol over ATM RFC 1577 $ Classical Internet Protocol over ATM Determining Your Connection Address and Configuration You will need to know the connection address and configuration for your Internet service.
  • Page 8 Connect one end of a phone cable to the RJ-11 port on the RECSPEED-2021P ADSL card and plug the other end of the cable into the ADSL data service.

  • Page 9: Connection

    Step3 – Install the drivers and establish an Internet service connection Driver Installation and Internet Service Connection Refer to the following chart and locate your connection protocol with your corresponding Operating System (OS). Then proceed to appropriate section/page. To install point to point Protocol over ATM Service (RFC 2364) Win95A Go to page 6 Win95B...
  • Page 10 Point to Point Protocol over ATM (RFC 2364) – Windows 95A After installing the RECSPEED-2021P card, plug the power cable back into the PC system and turn the power on. The New Hardware Found window will detect the card as a PCI Network Controller. Select the Driver from disk provided by hardware manufacture r option.
  • Page 11 15. The Dial-up Networking windows appears, click OK. 16. You must now restart your PC system. 17. At the conclusion of the RECSPEED-2021P driver installation, the Diagnostic Tool icon (Appendix A) is active and monitoring connectivity. You must now make a network connection.
  • Page 12 Point to Point Protocol over ATM (RFC 2364) – Windows 95B After installing the RECSPEED-2021P card, plug the power cable back into the PC system and turn the power on. The Update Device Driver Wizard will detect the RECSPEED-2021P ADSL NIC as a PCI Network Controller, click Next Insert the RECSPEED-2021P ADSL MODEM CD into you systems CD drive.
  • Page 13 20. The Dial-up Networking windows appears, click OK. 21. You must now restart your PC system. 22. At the conclusion of the RECSPEED-2021P driver installation, the Diagnostic Tool icon (Appendix A ) is active and monitoring connectivity. You must now make a network connection.
  • Page 14 Congratulations, you are done. Your RECSPEED-2021P the Internet is established! Point to Point Protocol over ATM (RFC 2364) – Windows 98, 98A After installing the RECSPEED-2021P card, plug the power cable back into the PC system and turn the power on.
  • Page 15 Letter> and then :\Win98 (e.g. D:\Win98) and click OK. 10. At the conclusion of the RECSPEED-2021P ADSL NIC driver installation, click Finish. 11. For the PC system to set up the RECSPEED-2021P ADSL NIC, a system Restart is required. Click Yes.
  • Page 16 Point to Point Protocol over ATM (RFC 2364) - Windows 2000 1. The Add New Hardware Wizard will detect the RECSPEED-2021P ADSL NIC as a PCI Network Controlle r, click Next. 2.Still in the Add New Hardware Wizard window, select Search for the best driver for your device.
  • Page 17 13. The Network Configuration window appears showing the Dial out Protocols: Select and check ( ) the TCP/IP protocol. Click OK. 14. The Network window will appear. Click the Adapte rs tab to verify that the RECSPEED-2021P ADSL PC NIC has been found. Click on the Protocols tab and verify that the ADSL Management and Monitor Interface is present.
  • Page 18 NOTE: If no previous network devices have been installed, then the Network Neighborhood icon will not be present on the desktop. To open the Network window, double-click My Computer then Control Panel then Network. 15. The Network Settings Change window appears. It prompts Do you want to restart your computer now? Click Yes.
  • Page 19 Classical Internet Protocol over ATM (RFC1577) - Windows 95A After installing the RECSPEED-2021P card, plug the power cable back into the PC system and turn the power on. CLOSE the Ne w Hardware Found window. The next section explains how to install the DUN.
  • Page 20 ( \ ), followed by the RFC1577 driver for Windows 95. For example, type in: D:\IPoA\Win95 Then click OK. 5. The Update Device Driver Wizard will then find the RECSPEED-2021P ADSL PCI NIC. Click Finish. 6. The Insert Disk window appears. Insert the RECSPEED-2021P Drivers CD. Click OK.
  • Page 21 2. The Network window appears. Select the Configuration tab, scroll the installed network component window and find RECSPEED-2021P ADSL PCI NIC. NOTE: If the RECSPEED-2021P ADSL PCI NIC is present go to step 3. If the RECSPEED-2021P ADSL PCI NIC is not present, click Add.
  • Page 22 9. If prompted to insert the CD do so at this time then click OK. Enter the <CD drive Letter> and then :\Win98 (e.g. D:\Win98) and click OK. 10. At the conclusion of the RECSPEED-2021P driver installation, click Finish. 11.For the PC system to set up the RECSPEED-2021P, a system Restart is required. Click Yes.
  • Page 23 13. The Network window appears. Select the Configuration tab, scroll the installed network component window and find RECSPEED-2021P ADSL PCI NIC. NOTE: If the RECSPEED-2021P ADSL PCI NCI is not present, click Add. The Select Network Component Type window appears. Select Protocol,and click Add. The Select Network Protocol window appears.
  • Page 24 On the control panel, double click Network. At the Network window select the Protocols tab and verify that the TCP/IP is present. After installing the RECSPEED-2021P card, plug the power cable back into the PC system and turn the power on.
  • Page 25 9. Then the Network window will appear, click Close. 10. The Microsoft TCP/IP Properties window will appear and prompt the user for information. In the Adapters selection be sure to select RECSPEED-2021P ADSL PCI NIC. When not connecting to DHCP server.

  • Page 26: Indows 95B

    Proceed to Making an Internet connection for Bridged Ethernet. Go to page 25. Bridged Ethernet over ATM (RFC 1483) – Windows 95B The Add New Hardware Wizard will detect the RECSPEED-2021P ADSL NIC as a PCI Network Controlle r, click Next.

  • Page 27: Indows 98, 98A

    Proceed to Making an Internet connection for Bridged Ethernet. Go to page 25. Bridged Ethernet over ATM (RFC 1483) – Windows98, 98A The Add New Hardware Wizard will detect the RECSPEED-2021P ADSL NIC as a PCI Network Controlle r, click Next.
  • Page 28 Making an Internet Connection for Bridged Ethernet on Win 95, 98, 2000 Enternet 300 Installing EnterNet 300 v. 1.34 for Windows is desktop connectivity software used by the world’s largest and most reputable ISPs to enable their end-user customers to gain access to their high-speed Internet access services.
  • Page 29 The “Welcome” Panel If you are installing EnterNet 300 for the first time, or if you were presented the “Existing Installation Detected” panel and you clicked the “Yes” button, the next panel you will encounter is the EnterNet “Welcome” panel. This panel will advise you to exit all other programs before proceeding with the installation process.
  • Page 30 The “Choose Destination Location” Panel Here you are informed of the program's default installation directory. Click the Next button to accept the default installation location (recommended), or click Browse to specify a different installation location. The “Choose Folder” Panel If you wish to install EnterNet to other than the default installation folder, clicking the Browse button on the Choose Destination Location panel will present the “Choose Folder”...
  • Page 31 The "Question" Panel The EnterNet installer will present you with the option of automatically creating a shortcut to the EnterNet application during the installation process. Click "Yes" if you wish to create a shortcut on your desktop. Your Service Provider may have elected not to present this option. The “EnterNet 300 Setup”...
  • Page 32 Summary By successfully completing the above steps you have installed EnterNet 300 for Windows. You may now begin using EnterNet to establish a connection to your ISP. The next section of this User’s Guide, “Getting Help with EnterNet”, describes ways you can learn more about EnterNet 300 for Windows.
  • Page 33 User Name and Password Your profile's User name and Password will be used to authenticate you as a valid network user. They are both case-sensitive: "Password" and "PASSWORD" differ from "password." You must enter them exactly as they are specified. When you have finished, click Next to continue. If you wish to modify information entered on a previous panel, click Back.
  • Page 34 The "Locate Servers" Panel The next panel to be displayed will be the Locate Servers panel. This panel will inform you that EnterNet is ready to attempt to locate servers and services. Entering the Server Selection The EnterNet application displays a list of network servers and services that may be accessible to you via the network.
  • Page 35 Modifying a Profile You can modify the information entered for a Connection Profile at any time by right-clicking on the desired Profile icon in the EnterNet folder and selecting Properties from the pop- up menu. If you have already launched the profile you wish to modify, right-click on the profile's system tray icon and select Properties from the pop-up menu.
  • Page 36 Making the Connection Connecting with Ente rNet Once your Connection Profile has been saved, an icon representing it will appear in the right-hand pane of the EnterNet folder. Double-clicking on this icon will invoke the Connect panel, on which the User Name and Password are displayed. It will also result in the appearance of an EnterNet icon in the Windows system tray, which is by Windows default present in the lower right corner of your computer’s screen.
  • Page 37 •Receive data status •Network Health (see “Advanced Diagnostics”) Refer to the images below to better understand the meaning of each EnterNet system tray icon state. Disconnecting with EnterNet There are several ways to disconnect with EnterNet. If you want both to terminate your session and close the Active Connection Profile, right-click on the EnterNet system tray icon and select Exit from the pop- up menu.

  • Page 39: Indows 2000

    Bridged Ethernet over ATM (RFC 1483) - Windows 2000 1. The Add New Hardware Wizard will detect the RECSPEED-2021P ADSL NIC as a PCI Network Controlle r, click Next. 2.Still in the Add New Hardware Wizard window, select Search for the best driver for your device.

  • Page 40: Indows Nt 4.0

    ( D for example ), followed by a colon ( : ), then a back slash ( \ ), followed by the RFC1483 driver for Windows NT 4.0 . For example, type in: D:\BEoA\NT4.0 Then click OK. The Select OEM Option window will find the RECSPEED-2021P ADSL PCI NIC. Click OK. When the Service Option window appears, click Advanced.

  • Page 41: Tools

    RECSPEED-2021P drivers use the protocol that results in the most efficient ADSL connection. ADSL Diagnostic Tools window is used for hardware testing of the RECSPEED-2021P ADSL modem Card. ADSL Statistic window keeps tabs on errors that that might affect overall system performance.
  • Page 42 No to exit diagnostic program. The Diagnostic program performs a brief hardware check and displays the hardware status. If the RECSPEED-2021P fails the Diagnostic tests (shown below), then record the test result and contact customer support.

  • Page 43: Connector Pinout

    ADSL data port – identified by the ADSL installation. The center two pins, pins 3 and 4, are used for ADSL data. For the RECSPEED-2021P card to make a proper ADSL connection, the installed ADSL data port should also use pins 3 and 4 for data.

  • Page 44: Appendix B - Trouble Shooting

    Appendix B - Trouble Shooting If you have completed the RECSPEED-2021P installation procedures and your ADSL connection is not operational, then refer to the following guidelines for assistance in getting your ADSL modem connection up and running. Description of Problem 1 Is there a Diagnostic ICON on the taskbar? Try Restarting the PC system.
  • Page 45 8 Can I determine which protocol is installed? Windows 95/98 – Yes. In the Network window (in the Control Panel) select the Configuration tab and look for component TCP/IP & RECSPEED-2021P ADSL PCI NIC (scroll through the list). If found, then the Bridged Ethernet drivers are installed.

  • Page 46: Appendix C - Removing Recspeed-2021P Drivers (Ver 2.1.0)

    Right-click on the Local Area Connection icon, then select Properties. 2. Click the Configure in the Local Area Connection Properties. 3. Select Drivers tab in the RECSPEED-2021P ADSL PCI NIC Properties, then click Remove. 4. Click Yes. 5. Remove your *.inf files under INF folder in the Windows folder for perfect driver removal.

  • Page 47: Wnt4.0

    A warning message will inform you that a component is about to be removed. Click Yes. Once the RECSPEED-2021P ADSL PCI NIC is removed from the adapter list, click Close. The PC system must be restarted for the changes to take effect. Click Yes.
  • Page 48 RECSOL I&C Co. Ltd Fl. 6. Hanna B/D 123 Kwangjang - Dong, Kwangjin-Gu Seoul, Korea Tel : 82 - 2 - 456 - 3911 Fax : 82 - 2 - 456 – 8744 http://www.recsol.co.kr...

Table of Contents