Advertisement
Figure 2 Installing the Power Tap Adaptor
5. Screw the opposite end of the power tap adaptor to the AC interface on an AP-85FX or AP-85LX
model (see
6. Once connected, turn on the AC mains.
Figure 3 Connecting Power to the AP
Regulatory Compliance
European Union RoHS
manufacture of electrical and electronic equipment. Specifically, restricted materials under the RoHS
Directive are Lead (including Solder used in printed circuit assemblies), Cadmium, Mercury,
Hexavalent Chromium, and Bromine.
China RoHS
2
Existing Photosensor
Power Tap Adaptor
Streetlight
Figure
3).
This product complies with the EU Restriction of Hazardous Substances Directive 2002/
95/EC (RoHS). EU RoHS restricts the use of specific hazardous materials in the
This product also complies with China environmental declaration requirements
Connects to AC
Interface on AP
arun_0139
AC Connector on
Power Tap Adaptor
AC Interface on AP
arun_0140
AP-85 Streetlight Power Tap Adaptor
| Installation Guide
Advertisement
