FILTER DIRECT WH-10 Instruction Sheet

Removes sediment, rust, chlorine, odor, bad taste

Advertisement

F
D
ilter
irect,
1024 S. Linwood Ave, Santa Ana, CA 92705, U.S.A.
WHOLE HOUSE FILTER MODEL: WH-10
HEAVY-DUTY WHOLE HOUSE WATER FILTER

FEATURES:

1. Removes sediment, rust, chlorine, odor, bad taste
2. High-Flow with minimal pressure drop, 1" inlet
3. Dimensions: 13" x 7"
4. Pressure relief /bleed button on inlet side of cap.
5. Heavy-duty reinforced FDA grade polypropylene
6. 20,000- 50,000 gallon capacity (1 year service life)

BENEFITS:

7. Reduces cloudy water caused by sediment
8. Reduces wear on expensive faucets
9. Reduces iron stains caused by suspended iron
10. Reduces staining in sinks, toilets and showers
11. Removes chlorine, odor, and bad taste
12. Eliminates plugged faucet aerators
13. Ideal for homes, farms, wells, restaurants, pools, spas

Replacement Filter:

Big Blue Carbon Block Filter 20K-50K gal., part no. 288 $29

INSTALLATION:

NOTE: If water main temperature goes down to 40 F, the filter housing may break due to water expansion
or frozen pipe. Take precaution to avoid expose filter to near freezing temperature. If water temperature
gets to around 40 F, you must temporary shut off the filter and empty the water inside the filter housing
1. WH-10 is designed to be installed at the water main. You need to be capable of doing plumbing at the
water main or we highly recommend having a plumber to install this filter.
2. The inlet and outlet of the filter are 1" , you need to purchase the appropriate connection fittings
yourself.
3. Please refer to the following diagram for connection (must install gate valve 2, valve 3, valve 4)
C
o.
Tech/Info: 714-953-9009 Fax 714-953-9836
INSTRUCTION SHEET

Complete Kit includes:

1.
Big Blue Heavy-duty Housing
2.
Big Blue Carbon Block filter (20,000 gallons
capacity)
3.
Heavy-duty mounting bracket
4.
Filter Housing Wrench

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WH-10 and is the answer not in the manual?

Questions and answers

Summary of Contents for FILTER DIRECT WH-10

  • Page 1 40 F, you must temporary shut off the filter and empty the water inside the filter housing 1. WH-10 is designed to be installed at the water main. You need to be capable of doing plumbing at the water main or we highly recommend having a plumber to install this filter.
  • Page 2 GATE VALVE POSITION: 1. Using WH-10 to filter water, position of the gate valves are: Valve 1, Valve 3, Valve 4 OPEN, Valve 2 CLOSE 2. Bypass WH-10 filter, positions of the gate valves are: Valve 1, Valve2 OPEN, Valve 3, Valve 4 CLOSE.

Table of Contents