Table of Contents
Advertisement
Quick Links
The Florien
User Instructions
The Florien User Information
August 2011
Contents
1-2 Introduction to the Florien
2
The Florien Product Information
2
Questions and Concerns
2
Guidelines for Best Practice
3
The User Instructions
General Operation of the Florien:
3
Adjusting the chair for the user
3
What is Tilt-in-Space?
3
Operating the Tilt-in-Space
4
Legrest Elevation
4
Adjustable Headrest
4
Removeable Arms
5
Lateral Supports
5
Footboard
5
Headrests
6
Wheels
6
Lap-Belt
6
Service and Maintenance Indicator
7
Pelvic Positioner
7
Care and Maintenance
8
Potential Risks, Cautions and Warnings
8
Helpline
Introduction to the Florien chair
What is the Florien?
The purpose of the Florien chair is to provide simple yet effective postural seating that can meet a
variety of user needs for those with moderate to severe seating difficulties and for those seated
for lengthy periods.
Designed to easily adjust the tilt-in-space positioning without over-exertion by the carer or indeed
the user, the Florien integrates into many caring environments.
Meeting the needs of a higher specification product than the purely foam-based chairs the Florien
offers considerable support, dynamic movement and mobility.
Page 1
Advertisement
Table of Contents
Related Manuals for KIRTON Florien
Summary of Contents for KIRTON Florien
- Page 1 Introduction to the Florien chair What is the Florien? The purpose of the Florien chair is to provide simple yet effective postural seating that can meet a variety of user needs for those with moderate to severe seating difficulties and for those seated for lengthy periods.
-
Page 2: The Florien Product Information
Seek advice and input from a qualified therapist/professional and/or Kirton The Florien can be used within a variety of representative/distributor at the initial different environments including domestic prescription of the chair. -
Page 3: The User Instructions
Key to the Florien is the ability to effect the tilt-in-space without over exertion by the carer or indeed the user. -
Page 4: Legrest Elevation
• The articulating headrest is an integral • position one hand at the rear of the part of the back of the Florien chair. arm module on the corner edge and By bending the backrest at • the other hand at the front of the chair... -
Page 5: Lateral Supports
It has a fixed 90° angle and is height • The Florien can be fitted with two adjustable. • adjustable lateral supports on either The length of the footboard can be •... -
Page 6: Wheels
100mm Wheel Florien Chairs the rear of the chair. Attach the Lap-Belt using the hook • The Florien chairs are fitted with four fastening at the end of each strap to 100mm wheels with two fully locking wheels clip onto the D-Rings. -
Page 7: Pelvic Positioner
Pelvic Positioner Care and Maintenance (optional accessory) For recommended care, cleaning and maintenance, please refer to the care and maintenance guidelines enclosed with your chair and the care label fixed to the chair. General Care Wash and clean as per instructions •... -
Page 8: Potential Risks, Cautions And Warnings
Kirton distributor in the first instance please contact your point of reference Warnings there. The user is at risk if the Florien is not • properly specified and adjusted to their If your call concerns a specific seating particular requirements.
Need help?
Do you have a question about the Florien and is the answer not in the manual?
Questions and answers