Page 1
ROHO SOFFLEX Cushion ® ® Operation Manual Supplier: This manual must be given to the user of this product. User: Before using this product, read instructions and save for future reference. s h a p e f i t t i n g t e c h n o l o g y ®...
Norsk Suomi Português ROHO, Inc. has a policy of continual product improvement and reserves the right to amend this document. A current version of this document is available at www.roho.com. Manufactured by ROHO, Inc. 100 North Florida Avenue, Belleville, Illinois 62221-5429, www.roho.com.
ROHO medical products are intended to be part of an overall care regimen. ROHO, Inc. recommends that a clinician make product recommendations based upon an evaluation of the individual’s medical and therapeutic needs and overall condition.
TROUBLESHOOTING. • DO NOT use the inflation valve as a handle for carrying or pulling your cushion. • Using a pump, cover, or repair kit, other than those provided by ROHO, Inc., may void your product warranty. • Prolonged exposure to ozone may degrade some of the materials used in the manufacture of this product, affect the performance of this product, and void the product warranty.
SFLX2018C 20.25 x 18.25 51.5 x 46.5 For information about additional sizes: In the U.S.A., contact the ROHO Customer Care Department or call your product provider. Outside the U.S.A., contact your country’s ROHO distributor. Average cushion weight = 0.75 lbs. (0.3 kg) based on a SFLX1816C cushion...
Cushion Placement and Adjustment Turn the inflation valve counterclockwise to open. FRONT Slide the pump’s rubber nozzle over the valve. Inflate the cushion until it begins to FRONT slightly arch upward. Pinch the pump's nozzle and turn the inflation valve clockwise to close. Remove the pump.
Page 7
Cushion Placement and Adjustment, Continued The individual should sit in the wheelchair in their normal sitting position. Confirm that the cushion is centered underneath the individual and properly sized to the individual and the wheelchair. BACK Slide your hand between the cushion’s surface and the individual's bottom.
Cover Replacement and Removal While a cover is not required, a cover is included with every SOFFLEX Cushion to help prevent the cushion cells from protruding beyond the wheelchair seat and to aid in slide board transfers. The seated figure shows To Replace the Cover: standard orientation.
Air Dry. DO NOT machine dry. DO NOT expose to direct sunlight. DO NOT autoclave. To Sterilize the Cushion: Follow Cleaning and Disinfection guidelines. ROHO products are not packaged in a sterile condition nor are they intended or required to be sterilized prior to usage.
Belleville, IL 62223 Return Policy: All products returned must be new and unused, require prior authorization from ROHO Inc., and are subject to a restocking fee. Before returning your product: In the U.S.A., contact our Warranty Service Department. Outside of the U.S.A., contact your country’s ROHO distributor.
Need help?
Do you have a question about the SOFFLEX series and is the answer not in the manual?
Questions and answers