Advertisement
3
2
1
1. Battery
2. Contacts
3. Release Button
4. LED Battery State of Charge
5. Indicator Button
Operation
Battery state of charge
Press the button next to the indicator LEDs to check the state of the
battery charge. The indicator goes out after 5 seconds. If the LEDs
flash, the battery must be recharged. If the red LED lights up after
4
5
the button is pressed, the battery is faulty and must be replaced.
Battery Life
Never charge batteries at temperatures below 32° F (0° C) or above
104°F (40° C). Do not charge batteries in an environment which has
high air humidity or at a high ambient temperature. Do not cover
batteries and/or the battery charger during the charging process.
It is normal for the battery and charger to heat up during the
charging process.
Lithium ion batteries do not exhibit the well known "memory effect".
However each battery should be fully recharged before use.
Follow the instructions for charging the battery in the operating
instructions for the electric power tool and the battery charger.
Reduced operating times after recharging indicates that the battery
is worn out and may need to be replaced.
If the batteries are not used for a prolonged period, store batteries
partially charged and in a cool location 50° - 77° F (10° - 25°C).
Do not use batteries with damaged casing.
Do not dispose of in fire, water or household waste.
Avoid continuous exposure to extreme heat, water and humidity.
Battery voltage must match the battery charging voltage.
Use only with Redback charger and Redback 40V rated tools.
Disposal Information
Recycle raw materials instead of disposing as waste.
Battery, accessories and packaging should be recycled in an
environmentally friendly manner. Plastic parts are identified for
recycling according to material type.
!
CAUTION
Do not attempt to open batteries.
Advertisement
