Charging The Battery; Charging The Headphones And Charging Case - Audio Technica ATH-CKR7TW User Manual

Charging the battery

Charging the headphones and charging case

• Fully charge the battery when using for the first time.
• If the rechargeable battery power is running low, the product will beep through the headphones, and the indicator
lamps of the headphones will flash in red. In this case, charge the battery.
• It takes about 2 hours maximum to fully charge the headphones, about 5 hours maximum to fully charge the
charging case. (This time may vary depending on usage conditions.)
1. Connect the included USB charging cable (Micro USB Type-B side) to the battery jack of the charging case.
• The included USB charging cable is designed for exclusive use with the product. Do not use any other USB
charging cable.
• When inserting the USB charging cable into the USB port or battery jack, check that the connector is facing in the
correct direction before inserting it directly (horizontally).
2. Connect the included USB charging cable (USB Type-A side) to the computer to start charging.
Computer
3. After placing the headphones in the charging case, close the cover.
USB port
USB Type-A
USB charging cable
(Included)
6
Battery jack
Micro USB Type-B