Led Indicator - ActionTec 802PAG User & Installation Manual

User Manual of Wireless LAN 802.11a/g Dual Band PCI Adapter

LED Indicator

There are two LED indicators.
LED Functionality
LED0 LED1
(Power) (Netowrk)
Slow-rate OFF
blink
ON OFF
Alternate Alternate
blink blink
Slow-rate Slow-rate
blink blink
Fast-rate Fast-rate
blink blink
OFF OFF
Meaning
Power save mode
(default from power up
or reset)
Awake
Looking for network
association
Associated or joint with
network; no activity
Associated or joint with
network; blink rate
increases with activity
on the network over the
air or locally on the
network device based on
setting of the PCI
configuration register
No power applied to the
card
Comments
The hardware automatically
enter this state after exit from
power save mode before any
other activity. Changes from
power save mode to this state
might not be visible on the
LEDs if the software assumes
control of the LED blinking by
writing to the PCI
configuration register.
Power LED goes ON;
Network LED is OFF;
then Power LED goes OFF and
Network LED goes ON
7