Advertisement
Quick Links
Advertisement
Summary of Contents for Magnaflux S500
- Page 1 Operating Manual S500 filtration plant Part numbers 009Z001, 009Z002...
-
Page 2: Table Of Contents
The amount of contaminates absorbed by the media depends on several factors Magnaflux guarantees that its products will be free from defects in but can be generally be assumed to be a quarter of a litre per kilogram of carbon. -
Page 3: Typical System To Waste
(The The normal operation, valves one, two, three and six are open, four, five and seven fitting of float switches and grille are not necessary if the S500 is purchased at the are closed. -
Page 4: Electrical Controls
4. OPERATION 3.1 ELECTRICAL CONTROLS SWITCHES The S500 is fitted with safety pressure switches (PS1, 2 & 3) which will stop the pump running and illuminate a lamp LP2 "High Pressure" if any blockages occur ISO 1 Isolator during the normal filtration and backwash cycles. Pressure setting is 5 bar (70 psi). -
Page 5: Servicing
5. SERVICING 6. RECOMMENDED SPARE PARTS It is important to carry out the following to allow the filter to do its job properly. Part number Description Quantity Failing to carry out these procedures will result in contaminated water leaving the 001R029 Relay filter, damage to pump motor and early charge of carbon. - Page 6 Bahnhofstr 94-98, 73457 Essingen, Deutschland Telephone: +49 (0) 7365 81-0 Fax: +49 (0) 7365 81-449 Email: sales.de@magnaflux.com Web: eu.magnaflux.com/de Faraday Road, South Dorcan Industrial Estate, Swindon, SN3 5HE, UK Telephone: + 44 (0)1793 524566 Fax: +44 (0)1793 490459 Email: sales.eu@magnaflux.com...