Table of Contents
Advertisement
AFA1000/1 MK2 Airflow Monitor
Installation & Operating Manual
1 SAFETY
1.1 Safety Practices
This document describes the general safety practices and precautions that must be
observed when operating the Airflow Monitor.
This advice is intended to supplement, not supersede, the normal safety codes in the
user's country. The information provided does not cover every safety procedure that
should be followed. Ultimately, maintenance of a safe laboratory environment is the
responsibility of the user and the user's organisation.
Please consult all documentation supplied with the Airflow Monitor before starting
to work. Carefully read the safety information in this document and in the other
documentation supplied. When setting up the equipment or performing analysis or
maintenance procedures, strictly follow the instructions provided.
1.2 Warning Notices
Within this User Guide WARNINGS are used to highlight information or instructions
that must be followed in order to avoid personal injury to yourself or other people in
the vicinity, eg. switch off the mains voltage before any maintenance.
WARNINGS appear as below:
1.3 Precautions
The following precautions must be observed when using the Airflow Monitor
and associated systems:
• Be sure that the voltage of the Airflow Monitor equipment corresponds to the
voltage available where it is to be installed.
• Never remove the side or back panels of the Airflow Monitor without first shutting
down the equipment and disconnecting the power supply.
Version 01 /
p.5
Advertisement
Table of Contents
