Table of Contents
Advertisement
Assembly Instructions / TPS61-R
4 Installing the turbocharger / 4.1 Connecting ABB gas pipes
4
Installing the turbocharger
Requirements for the fixing screws (01)
The fixing screws (01) that are required for attaching the turbocharger bracket (02) to the
engine support (03) are not included in the ABB Turbo Systems scope of delivery. These
parts depend on the version of the engine-side bracket.
Fig. 4: Requirements for fixing screws
Product
Diameter
Hole in
bracket
[mm]
TPS61-R
Ø18 / M16
Table 5: Requirements for fixing screws
4.1
Connecting ABB gas pipes
Fig. 5: ABB gas pipes
1. Connect the ABB gas pipes (01) to the gas pipes of the engine. Observe the instructions
of the engine builder.
© Copyright 2018 ABB. All rights reserved.
Screw size
Length
L1 [mm]
M16
≥ 30
HZTL455311P0036_EN
Length
Material
L2 [mm]
DIN / ISO 898
(Part 1)
120
10.9
Revision A
Tightening
torque
300 Nm
August 2018
Advertisement
Table of Contents
