1. Manuals
  2. Brands
  3. Gerrmi Technology Manuals
  4. GPS
  5. BT305
  6. User instruction

Gerrmi Technology BT305 User Instruction

Hide thumbs

Advertisement

Table of Contents

BT305
User Instruction
V1.0
Gerrmi Technology Co., Ltd.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BT305 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gerrmi Technology BT305

  • Page 1 BT305 User Instruction V1.0 Gerrmi Technology Co., Ltd.
  • Page 2 Step 1: Attach BT305 on a storage box. BT305 must be outside of the box, the box must has a hole to provide a channel to connect to the device. BT305 has a tube feature which needs to insert to the hole of the box.
  • Page 3 Step 2: Connect the battery housing and switch to BT305. Install the battery and BT305 will be turned on automatically. Install the battery. Connect BT305 to the switch. Connect BT305 to the battery housing.
  • Page 4 Step 3: Close the box and use smartphone APP to enable BT305. Step 4: BT305 standby to detect the environment change inside the box by sensors and switches.
  • Page 5 Once the device/box was moved, the g-sensor will detect the movement and BT305 will send data to the smartphone by BLE. Once the cover of the box was open, the switch will be triggered and BT305 will send data to the smartphone by BLE.
  • Page 6 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 7 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Table of Contents