Table of Contents
Advertisement
Quick Links
Hello
We know you have a choice of Interlock providers, thank you for choosing Alcohol Detection Systems. In this
user's manual, you will find all the information you need to make your time with our device as easy as possible.
After reading this entire manual, you should have a good understanding of the use of the device, if not re-read the
material. Finally the installer will walk you through the basics. There is a lot of information here so take your time
YOU MUST RETURN TO YOUR INSTALLER WITH YOUR VEHICLE SO THEY CAN PERFORM
BE SURE TO SCHEDULE THIS APPOINTMENT BEFORE YOU LEAVE TODAY! AND MAKE A
Each time you come in for service you will be given a calibration form, you must keep this form along with your
installation form, in your vehicle at all times. This is evidence that you are keeping your Breath Alcohol Ignition
Interlock Device (BAIID) properly maintained. Every day when you power up your device it will display a
countdown to your next mandatory service date. Your device has a 7-day buffer by design (should operate normally
Using that buffer may cause your required time on the BAIID to be extended.
There is a difference between the device stating SERVICE DUE...and LOCK DUE
At every start up the device will display the number of days till service (service due XX days) pay attention to this number, if
you have an event, or other issue which results in an early return for service, that displayed message will change to a lock due
XX days and the verbal notification changes to "Return for service soon" You need to contact our office immediately to
avoid being locked out of starting your vehicle. AGAIN, if you have an event it may result in your device displaying a
"LOCK DUE IN 7 DAYS" message, or if your unit vocally says "return for service soon" you will need to contact Alcohol
Detection Systems immediately to schedule early service with your BAIID Technician.
Please be absolutely sure you understand how to use this device before you leave today!
PLEASE READ THIS ENTIRE MANUAL BEFORE YOU LEAVE TODAY!!!
If you have an event which results in a "LOCK DUE 7 DAY" Message, you will need to pay an early return fee,
these can occur from not following directions so be sure you know how to use the device.
WARNING! ANY PERSON TAMPERING, CIRCUMVENTING, OBSCURING CAMERA IMAGES, OR
OTHERWISE MISUSING THIS DEVICE IS GUILTY OF A CLASS A MISDEMEANOR, TAMPERS WILL
BE DETECTED BY THE DEVICE AND REPORTED TO YOUR SENTENCING AGENCY, AND THE
KANSAS DEPARTMENT OF REVENUE, and THE KANSAS DEPARTMENT OF TRANSPORTATION
If you ever have any questions Refer to your owner's manual and if necessary call us at (888) 786-7384/
888-786-7384 we will be glad to answer any questions, or assist you with anything we can!
The State of Kansas Allows for Individuals who qualify to receive a reduction in their monthly lease payments,
and familiarize yourself as much as you can with it.
YOUR STATE MANDATED SERVICE EVERY 30 DAYS!
RECORD OF IT ON YOUR CALENDAR!
for 7 days beyond the "service due at midnight" notification).
ANY SERVICE INQUIRIES SHOULD BE MADE TO ADS @ 888-786-7384
if you believe you may qualify contact our staff to apply
ADS Determinator User's Manual
KS Rev 10 – Released – 1/1/2019
www.ADSinterlock.com
(888) 786-7384
Advertisement
Table of Contents
Summary of Contents for ALCOHOL DETECTION SYSTEMS ADS Determinator
- Page 1 Hello We know you have a choice of Interlock providers, thank you for choosing Alcohol Detection Systems. In this user’s manual, you will find all the information you need to make your time with our device as easy as possible.
- Page 2 If you have your vehicle serviced you must notify Alcohol Detection Systems prior to, or within 24 hours after ANY major service, this does not include oil changes, or tires. We are mainly concerned with repairs under the hood or within the vehicles electrical system.
- Page 3 Failure to do so may require early service or a complete vehicle lockout – at the driver’s expense and inconvenience. Always operate the vehicle and provide breath samples in a safe manner. 1. ADS Determinator System Overview Alcohol Detections Systems’ Determinator is a breath alcohol ignition interlock device (BAIID) designed to prevent a driver from starting a vehicle when his breath alcohol content (BRAC) is above a defined set point.
- Page 4 YOU MUST READ THIS ENTIRE MANUAL BEFORE YOU LEAVE TODAY!!! 3.3. Warm Up The Determinator must warm to operating temperature before a sample is requested. Bringing a unit indoors in a cold climate will reduce the required warm up time. The message displayed while heating shows 0% to 100% completion.
- Page 5 7 days. If this occurs the unit will be locked out unless returned for service within this time period, you will need to notify Alcohol Detection Systems of the situation so that we can ship a replacement Hand Held device before the countdown ends, there is a charge for this type of violation.
- Page 6 LOCK DUE message. A vehicle must be in good operating condition when the device is installed. A user must contact Alcohol Detection Systems prior to the loss of power whenever possible or as soon as possible after it occurs, the state of Kansas may send you a request for explanation, on this type of event, whenever possible obtain documentation on a power interruption for your own protection.
- Page 7 A: If your device drastically jumps dates from service due to a Lock Due message then it is calling for early service due to some reason. You will need to contact Alcohol Detection Systems about this issue, and a replacement Handset will need to be sent. There is a charge for this earlier than normal service, however without this service your device will lock you out of starting your vehicle when the “Lock Due”...
- Page 8 YOU MUST READ THIS ENTIRE MANUAL BEFORE YOU LEAVE TODAY!!! 14. Startup Error Messages The following messages may be displayed at unit startup with the unit temporarily disabled. If this occurs, turn the ignition off and back on to retry normal operation.
Need help?
Do you have a question about the ADS Determinator and is the answer not in the manual?
Questions and answers