Advertisement
4
NOTE
When installed properly into a wooden stud, WallDock Hangers and Hooks will hold over 50 lbs. When installing on drywall,
locate the stud behind the drywall and drill screws through the drywall and into the stud for best results.
Once the WallDock is securely mounted, just snap any item from the Snap2It family of products over the
WallDock so it snaps behind the red tab. Remove by pushing up on the red button. It's easy to take it with
you or snap it onto another WallDock to change location.
Limited Warranty:
These products are sold "as is" without any express or implied
warranties. ITW Brands' sole liability, if any, shall be to replace this product or refund
the purchase price. The performance of these products is subject to variable
conditions and maximum load ratings are shown for comparison purposes only.
SWD-3B
Made in China
ITW Brands, A division of Illinois Tool Works Inc.
955 National Parkway, Suite 95500
Schaumburg, IL 60173
800-783-7725
www.RacorStorageSolutions.com
Email: racorcs@itwbrands.com
© 2011 Illinois Tool Works Inc.
Racor and Racor logo are registered trademarks of Illinois Tool Works Inc.
Press cover over WallDock
until it snaps into place.
5
Slide Hook or Hanger over
WallDock until it snaps into
position.
H O M E S T O R A G E P R O D U C T S
Thank you for purchasing this product.
Racor storage and organizational
solutions will inspire and put you back
in control of your space. Racor has the
largest variety of solutions to organize
and store bikes, sports equipment,
lawn and garden supplies, bulky items
like ladders and totes, and clutter items
like tools. Please visit
www.RacorStorageSolutions.com
other great organizational products.
for
Advertisement
