CEN-TECH 3-PIECE SET Owner's Manual & Safety Instructions

Download this manual

Owner's Manual & Safety Instructions

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2017 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Keep this manual for the safety warnings and precautions, assembly,

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

17i

Need help?

Do you have a question about the 3-PIECE SET and is the answer not in the manual?

Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
Page 2 Specifications Probe Type Needle-point w/ cap, 1.75″ L Voltage Range 6/12/18/24/36 DC Lead Wire 48″ in length, included with each tester Battery Bulb Bulb A: 1.1V, 2W Bulb B: 12V, 3W Bulb C: 36V, 3W IMPORTANT SAFETY INFORMATION 1. Keep work area clean. Cluttered 12.
Page 3 Operation Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Note: Your Circuit Tester comes completely 1. Connect the Alligator Clip (11B) to the vehicle as a assembled.
Page 4 Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Replacement parts are not available for this item. Maintenance 1. To clean the Circuit Tester, remove the Alligator Clip (A-13, B-11, C-12) from any/all power sources.

63612