Vol/Mute Set; Vol/Mute Reset; Time-Setup - Silvercrest KH2150 Operating Instructions Manual

VOL/MUTE SET

Set the volume control for each individual device.
S
1. Hold the button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/MUTE SETUP appears
in the LCD display.
4. Press the right arrow button (6). ALL VOL.SET appears in
the LCD display (2).
5. Press the down arrow button (6) repeatedly until
VOL/MUTE SET appears in the LCD display (2).
6. Press the right arrow button (6). MODE VOL. MODE?
appears in the LCD display (2).
7. Press the desired device button (4), such as "DVD".
PLEASE WAIT... then SUCCESS appears in the LCD
display (2).
The volume is set via the selected device. Automatic switching
to the volume control on the television is deactivated.

VOL/MUTE RESET

Reset all VOL/MUTE settings to the factory defaults.
S
1. Hold the button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/MUTE SETUP appears
in the LCD display (2).
4. Press the right arrow button (6). ALL VOL.SET appears in
the LCD display (2).
5. Press the down arrow button (6) repeatedly until
VOL/MUTE RESET appears in the LCD display (2).
6. Press the right arrow button (6). CONFIRM RESET appears
in the LCD display (2).
7. Press the right arrow button (6). First PLEASE WAIT... then
SUCCESS appears in the LCD display (2).
The remote control is reset to the factory defaults of the
manufacturer.

TIME-SETUP

Set the time format and the time.
Note:
Press the up or down arrow button (6) for 12-hour display. All
other settings are explained using 24-hour display as example.
S
1. Hold the button (5) pressed until CODE-SETUP appears
in the LCD display (2).
2. Press the down arrow button (6). SYSTEM-SETUP appears
in the LCD display (2).
3. Press the right arrow button (6). VOL/ MUTE SETUP appears
in the LCD display (2).
12