Do you have a question about the Spectrum Light Mirrors and is the answer not in the manual?
Questions and answers
Summary of Contents for Sector Seven Spectrum Light Mirrors
Page 1
Spectrum Light Mirrors with JK Jeep Door Mounts Thank you for purchasing Sector Seven’s Spectrum Light Mirrors for your ride! Please read through all instructions before installing product. Installation should be straight forward but if you have any technical questions please contact us.
Page 2
Step 3 | Install Door Plate onto Mounting Block. Ensure that alignment pins on Mounting Block are properly seated in alignment holes on Door Plate. Confirm that when viewing mount from the front, Sector Seven logo is aligned horizontally and Threaded Standoffs on the back side are stacked vertically.
Page 3
Installation Instructions Cont’d — Spectrum – Light Mirrors Step 7 | Remove OE mirrors from door. *Pro Tip: If planning to run cable for new light mirror through door, and if existing mirrors are power mirrors, attach a string or wire to factory wire before feeding it through door and leave string/wire inside door (one end on interior side, one end on exterior side) after mirror is removed.
Page 4
Spectrum Warranty | If Sector Seven determines, in its sole discretion, that your product is defective in material or workmanship, Sector Seven will honor your warranty claim. In some cases, the product may be replaced depending on the specific timeframe of the purchase.
Need help?
Do you have a question about the Spectrum Light Mirrors and is the answer not in the manual?
Questions and answers