Dakota Micro, Inc. Users Manual OverView® Wireless Components Users Manual Part Number(s): RHPAIR, RHTX & RHRX Table of Contents I. Before you Install 2 II. Available Kits 2 III. Included Wireless Components 2 IV. Standard Features 3 V. Parts of a Wireless System 3 A. Standard Wireless Inputs (front) 3 B. Standard Wireless Inputs (Rear) 3 VI. External Antennas ...
Dakota Micro, Inc. DMOV-RH User Manual BEFORE YOU INSTALL Always read the manuals prior to operating this equipment, & please follow all safety signs and precautions. See DM website for installation training videos at www.dakotamicro.com. In order to better understand your new wireless equipment, we recommend that you power both your transmitter and receiver in an indoor, controlled location (i.e. from one side of a room to another) to better get acquainted with the equipment before installing it in its permanent location. AVAILABLE KITS PN: DMOV‐RHPAIR Kit Includes PN’s: DMOV‐RHRX DMOV‐RHTX NOTE: Each transmitter may only transmit signal from one camera, however you may receive that signal on multiple receivers. III. INCLUDED WIRELESS COMPONENTS (PER PN: DMOV‐RHTX) (PER PN: DMOV‐RHRX) Description Picture Description Picture Wireless Transmitter Wireless Receiver 3dBi Wireless 3dBi Wireless Antenna Antenna ...
Dakota Micro, Inc. DMOV-RH User Manual STANDARD FEATURES Allows for easy wireless upgrade for your OverView system Your receiver is conveniently powered from your OverView monitor for mobile applications Easy access RCA output jacks enable you to directly view your image on your own television You can have as many as 4 cameras wireless All transmitters & receivers are available individually Waterproof Transmitters can be mounted outside in hot, cold or wet conditions Transmits on powerful and reliable 2.4GHz bandwidth Optional antennas allow you to view cameras up to 3+ miles away (with line of sight) PARTS OF A WIRELESS SYSTEM A. Standard Wireless Inputs (front) ® For additional video features other than OverView Transmitter (PN: DMOV‐RHTX) 1. Covered ‐ External audio input not available on this model 2. External video input Receiver (PN:DMOV‐RHRX) 1. Covered ‐ External audio output not available on this model 2. External video output ...
Dakota Micro, Inc. DMOV-RH User Manual EXTERNAL ANTENNAS Included Accessory ‐ Standard 3dBi Antenna (included accessory) Maximum Distance ‐ 2,000' (feet) BENEFITS Small No extra cost TIPS Short transmitter and Receiver distance No add‐on extension cable Available Accessory ‐ Magnet Mount 5dBi Antenna w/ 6’ cable ( PN: DMAC‐WA5) Maximum Distance 1‐2 miles BENEFITS Magnet Mount is great for mobile applications Low Cost TIPS Extra metal plate needed for plastic cabs No add‐on extension cable Available Accessory ‐ 8dBi Omni‐Directional Antenna w/ 20’ cable ( PN: DMAC‐WA8) Maximum Distance 2‐3 miles BENEFITS Sturdy construction Additional extension cables available TIPS ...
Dakota Micro, Inc. DMOV-RH User Manual VII. INSTALLATION A. Installation Tips The Dakota Micro wireless add ‐on is a powerful wireless audio/video transmitter, which will allow you to view areas out of reach of cables. In selecting a location for the transmitter use the following guidelines. Training videos are available on the Dakota Micro website at www.dakotamicro.com. Location within 2,000 feet of receiver location (unless using larger antennas). Line of site, meaning that there is no obstruction , such as a building or tree belt. Shorter ranges fewer than 300 feet, are less critical of “line of site”. However, steel buildings and steel walls will interfere with the signal. Walls constructed of wood and sheetrock are more transparent to the signal. The ability for the signal to penetrate glass depends upon if the glass is lead lined. There are several environmental conditions, such as high powered electrical lines, other wireless device signals from cell phone companies, government agencies and radio stations; for example, that may affect the range of transmission. Therefore DM cannot guarantee any specific ranges. Standard transmitters and receivers must be installed indoors in a dry location. For steel buildings, you must use an external antenna. Waterproof transmitters may be installed outside in the weather/rain. You may use AgCam ® cables to mount camera up to 160 feet from transmitter. However Dakota Micro, Inc. power/video cables are not able to carry audio signal. If you require audio, you must obtain special cables from your dealer. Rev: 06/29/17 Page 5 of 12 Author: CNR ...
Dakota Micro, Inc. DMOV-RH User Manual B. Transmitter Installation ® When being used with an OverView Camera: 1) Attach supplied 3dBi antenna (1) or optional larger accessory antenna (details on page 4 of manual). 2) Plug in the provided A/C power adaptor into rear of transmitter (2), then plug into outlet to power. ® 3) Plug the OverView camera directly into the wireless camera input (3) 4) Extension cables may be used to locate the camera away from the transmitter for a distance of up to 160 feet. The transmitter must have only one input used at a time; either by front RCA inputs or camera input (3). C. Receiver Installation When being used with the Dakota Micro, Inc. monitor: 1) Plug the OverView connector into one of the available monitor connectors (1). 2) Power the monitor as instructed in the manual ...
Dakota Micro, Inc. DMOV-RH User Manual VIII. EMISSIONS NOTIFICATIONS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. In order to comply with FCC rules for protection against radio frequency exposure, this device must be installed in a manner to provide a minimum separation of 20cm (8”) between the antenna and all persons. Changes or modifications not expressly approved by Dakota Micro could void the user's authority to operate the equipment. Canada This device has been designed to operate with an antenna having a maximum gain of 15dBi. Antennas having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the Equivalent Isotropically Radiated Power (EIRP) is not more than that required for successful communication. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc‐ sc.gc.ca/rpb. ...
Dakota Micro, Inc. DMOV-RH User Manual SPECIFICATIONS A. Transmitter Frequency Ch1‐2.411GHz / CH2‐2.431GHz / CH3‐2.451GHz / CH4‐2.471GHz @ 100mw Channel 4 Selectable channels Video Input Signal Video‐1Vp‐p(NTSC/PAL) Audio‐1Vp‐p(NTSC/PAL) Video‐75 ohms Video Input Impedance Audio‐600 ohms (NTSC)/10Kohms(PAL) A/V jack‐RCA to RCA line jacks (not available on Waterproof version) A/V Connections Or ‐ OverView® camera plug Antenna Dipole Antenna (Detachable: Optional antennas available) Operating Voltage DC 9V‐12V/1500mA power adaptor Temp Limit Not to exceed 120°F B. Receiver Frequency Ch1‐2.411GHz / CH2‐2.431GHz / CH3‐2.451GHz / CH4‐2.471GHz @ 100mw Channel 4 selectable channels A/V Connections A/V jack‐RCA to RCA line jacks Antenna Dipole Antenna (Detachable: Optional antennas available) Operating Voltage ...
Dakota Micro, Inc. DMOV-RH User Manual WARNINGS When selecting a camera system from Dakota Micro, be sure to utilize the appropriate system for your use. AgCam and EnduraCam cameras are designed for high impact, moisture, vibration and a variety of other rough conditions. OverView cameras and kit components are designed for light use, low vibration and low moisture. OverView equipment is not warranted when used in situations outside of the above mentioned parameters. We always request that customers keep in mind that our less expensive OverView product line is cheaper because it does not feature the reliability and durability of our AgCam and EnduraCam lines. The warranty available on these products reflect that durability. To avoid electrical shock and maintain optimal functionality, do not open the enclosures. High voltage may be present and there are no user serviceable parts inside. All warranties will be void should any enclosures be tampered with in any way. Do not use any harsh chemical solvents, cleaning agents or corrosive detergent to clean away dirt on the surface of the screen or lens. On AgCam and EnduraCam products, the photo‐chromic camera lenses have been made impact‐resistant and have been drop‐ball tested according to Sec. 3.84,21 CRF BUT ARE NOT UNBREAKABLE. Because they have been hardened chemically, they show no stress pattern. Inspect your lenses frequently. Chipped or scratched surfaces will reduce protection. Such lenses should be replaced only by the manufacturer. Power to cameras is not interrupted by turning off monitor; 12v power source must be terminated when not in use to avoid battery drain. To avoid this problem be sure when hard wiring a unit, use a fused circuit. Do not use your Dakota Micro camera system for anything other than legal surveillance and observation uses. Dakota Micro, Inc. is not liable for any illegal or nefarious usage. Rev: 06/29/17 Page 9 of 12 ...
Dakota Micro, Inc. DMOV-RH User Manual PRODUCT WARRANTY/REPAIR PROCESS 1. For Technical Support call 1 701‐538‐4403 OR email techsupport@dakotamicro.com 2. Technician will assist in troubleshooting product malfunction. 3. If product malfunction cannot be remedied and a repair is deemed necessary, Technician will issue a Repair Authorization (RA) number. IMPORTANT NOTE: The Technician will note on the RA form if the repair APPEARS to be a warranty or non‐warranty issue based on customer description of the issues at hand. No final determination can be made until inspection and testing of the equipment is completed at the factory. 4. To ensure fast and effective repairs, customer is required to send: Dakota Micro Product that Technician has requested/deemed necessary in the proper diagnosis and repair of malfunction. This may include some or all components of the kit. Original/Copy of purchase receipt. For serialized items ONLY; If a copy of the original purchase receipt cannot be provided, then DAKOTA MICRO will use the product manufacture date. Customer information, including return address & phone number. If the phone number is not included, the customer will be sent a letter requesting the needed information. RA Number provided by Dakota Micro Technical Support Shipping and associated costs to ship product to DM factory to be borne by the customer unless otherwise specified. 5. Customer should mail product to: Dakota Micro, Inc. ...
Dakota Micro, Inc. DMOV-RH User Manual XII. CONSUMER LIMITED WARRANTY Subject to the disclaimer, limitations and other directions stated hereafter, Dakota Micro, Inc. warrants that the Product will be free from defects in material and workmanship for periods as stated hereafter from the date of original purchase. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS. THE EXCLUSIVE REMEDY OF THE BUYER IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT. EXCEPT AS STATED IN THIS WARRANTY, DAKOTA MICRO SHALL NOT BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY OF ANY OTHER LEGAL THEORY. Any oral statements or representations made by anyone which are contrary to or at variance with the terms stated in this LIMITED WARRANTY are void. Dakota Micro will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period of three (3) years for AgCam® /EnduraCam® and InnoPro® cameras; two (2) years for AgCam®/ EnduraCam® monitors, and Wireless components; Twelve Months (12) for all Overview Cameras & Monitors, cables and all other accessories. The Dakota Micro limited warranty periods outlined above apply throughout the United States and Canada only. A one (1) year maximum limited warranty for all Products applies to all other geographic locations unless otherwise stated in writing by Dakota Micro. This limited warranty does not apply to any issues connected with appearance that have no relation to the performance of the Product nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth in the complete Dakota Micro “Warranty & Repair Policy” listed on page 11 ‐ section XI , and provide proof of purchase to Dakota Micro. Neither the sales personnel of Dakota Micro nor any dealer or any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time periods described herein. The warranties described herein shall be the sole and exclusive warranties and remedies provided by Dakota Micro. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Dakota Micro to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims. In no event shall Dakota Micro be liable or in any way responsible for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than Dakota Micro. Some states do not allow the limitation or exclusion of incidental or consequential damages, so said limitation may not apply to you. Any action at law, suit in equity, or other judicial proceeding for the enforcement of any right provided for herein or otherwise, or with respect to any claim that a purchaser may have against Dakota Micro shall be instituted only in the Courts of the State of North Dakota, either in the state district court located in Wahpeton, North Dakota or in Federal District Court location in Fargo, North Dakota. Without regard to conflicts of law principles, the laws of the state of North Dakota shall govern the interpretation and enforcement of the terms of this Limited Warranty and all ...
Dakota Micro, Inc. DMOV-RH User Manual XIII. DISCLAIMER Dakota Micro Inc. products, specifications, pricing and programs are subject to change without prior notice. Dakota Micro Inc. reserves the right to make design changes at any time without obligation to retroactively install them on previously sold units. XIV. CONTACT US Dakota Micro, Inc. 8659 148th Ave. SE. Cayuga, ND 58013 Management System Registered to ISO 9001 www.dakotamicro.com Rev: 06/29/17 Page 12 of 12 Author: CNR ...