Datamars BLUESTICK Quick Start Manual page 3

2 Set up a new scanning session
2.1 Reading & Saving Tag Data
To read and save your scan, proceed as follows:
Press S to enter the Menu
Press the left arrow 3 times, press S to open Data File Menu
Press S to create a "New File"
A new file appear with the title <BS+yymmdd_time>
Press the ON/OFF button 3 times until you are back to the reading screen
Your Bluestick and your data file are now ready for you to begin scanning your livestock.
All tags will be recorded in this data file until a new one is created.
NOTE: when a tag is read for the first time, the reader will beep and vibrate twice. If the tag is
read a second time, the reader will only beep and vibrate once and this second reading will not
recorded.
SUCCESSFUL TAG READING
The following screenshot shows the result of a successful reading session:
UNSUCCESSFUL TAG READING
The following figure shows the result of an unsuccessful reading session:
Bluestick_EN_ES_IT
1. Tag type + Field Info
2. Country Code + ID Code
3