ToCAD America Inc. Sunpak Bluetooth SelfieStick SP-RBTSW-BK Owner's Manual

Sunpak Bluetooth SelfieStick
Owner's Manual
Please spend a few moments reviewing these instructions, so that you
can take full advantage of your SelfieStick's features and capabilities
Adjustable Smartphone Mount can support practi-
cally any smartphone or phablet. Strong and sturdy
enough for any smartphone. Expands up to 3.5" wide.
Lock Knob allows the smartphone holder to be
adjusted to allow for 180° movement and settings.
Loosen the lock knob to position your head and tighten it
once you have achieved your desired position. Folds
inward for compact storage. You can also remove the
smartphone holder and mount a GoPro directly to the
SelfieStick, or mount a point & shoot camera via the in-
cluded 1/4"-20 mount.
SelfieStick has five Twist and Lock Sections. To deploy
the sections, grasp the foam grip in one hand and the
smartphone holder in the other hand.
Rotate the foam grip counter-clockwise. You will feel
each section unlock with each slight rotation. Once all of
the sections are unlocked, extend the SelfieStick to your
desired length. Then rotate clockwise to lock the
sections in place.
Bluetooth Shutter Release with buttons for Apple
and Android. The remote fits securely into the supplied
holder and clips on to the SelfieStick. You can control
the functions on your smartphone or phablet up to 30
feet away from the SelfieStick.
The SelfieStick comes with a Foam Grip on the bottom
section so you can comfortably and securely grip your
SelfieStick.
How to use:
1. Loosen the Lock Knob and rotate the smartphone mount
upwards to allow it to accept a smartphone or phablet.
To lock the smartphone holder in place, tighten the Lock
Knob.
2. Attach your smartphone or phablet in the adjustable
holder.
3. Attach the Bluetooth Shutter Release by clipping it onto
the SelfieStick section. Pair the Shutter Release with
your smartphone or phablet.
4. To attach a GoPro to your SelfieStick, loosen and re-
move the Lock Knob and remove the smartphone holder
from the SelfieStick. Then attach a GoPro directly into
the forks on the SelfieStick. Replace the Lock Knob and
re-tighten to secure.
5. To attach a camera, camcorder or any other unit that
has a standard 1/4"-20 mount, remove the Lock Knob
and install the Point & Shoot adapter.
Note: For additional information and pairing or mount-
ing instructions, please see the reverse page.
Specifications:
Compatibility:
Load capacity:
Weight:
Maximum length:
Minimum length:
Leg sections:
Leg material:
Maximum working distance:
Battery:
Warranty:
Product design and specifications subject to change without notice.
ToCAD America Inc.
53 Green Pond Road
Rockaway, NJ 07866, USA
sunpak.com
Apple, Android
1.1 lbs.
6 oz.
35 in.
9.25 in.
5
aluminum
30 feet
CR2032
1 year