Operating Manual ..............4 General ......................4 Information on this manual ................4 Warning notices ....................4 Limitation of liability ..................5 Copyright protection ..................5 Safety ..................5 Intended use ....................5 General Safety information ................6 Sources of danger ..................7 2.3.1 Danger of injury ....................
Your Coffee Compact will serve you for many years if you handle it and care for it properly. We wish you a lot of pleasure in using it! 1.2 Information on this manual...
The original German text remains solely binding. 1.5 Copyright protection This document is copyright protected. CASO Design USA LLC. reserves all the rights, including those for photomechanical reproduction, duplication and distribution using special processes (e.g. data processing, data carriers, data networks), even partially.
► Do not leave the device unsupervised when it is in operation. ► Do not operate the Coffee Compact if it is empty. This could damage the device. ► Never fill the water tank beyond max-marking. Do ot use the device in case of overflowing.
Please note ► Defective components must always be replaced with original replacement parts. Only such parts will guarantee that the safety requirements are fulfilled. ► For your own safety, only use manufacturer accessories and spare parts suited to your device. ►...
2.3.2 Danger of burns Warning The water, heated in this coffee maker, the jug, the water tank as well as the warming plate, become very hot. Please observe the following safety notices in order not to burn or scald yourself or others. ►...
► Transport, unpack and use two persons to set down the device because of the heavy weight of the device. 3.2 Delivery scope and transport inspection As a rule, the Coffee Compact is delivered with the following components: coffee compact jug ...
The electrical socket must be easily accessible so that the power lead can be disconnected easily, in the case of an emergency. The installation and assembly of this device in non-stationary setup locations must be carried out by specialist companies / electricians, provided they guarantee the prerequisites for the safe use of this device.
4.1 Overview 1 steam vent 2 lid of grinding/brewing container 3 filter 3a handle of the filter 4 blades of grinder 5 grinding/brewing container 6 drip stop 7 lid of water tank 8 scale of watertank 9 control dial with OFF, setting for ground coffee or coffee beans 10 start button 11 warming plate...
Assembly of grinding/brewing container with filter and lid Place the grinding/brewing basket, until you a hear a click sound (1) turn it clockwise until the container latches. Take the filter at its handle (A) and place it a position B into the grinding/brewing container. Place the lid of grinding/brewing container, observe that the water tube C is placed into the water inlet D, and press the lid downwards until it latches.
Fill fresh water into the water tank and turn control dial on position Press start button. The device will start working and the circuit of the device is rinsed through. When the start button stops flashing then turn the control dial to OFF. Pour out the hot water.
Place the jug on the warming plate, tilt it slightly when you place it. Plug into outlet, you can hear an acoustic signal, the device is in standby mode. Turn the control dial to desired setting (1). You can hear an acoustic signal, then press start button (2).
5.1 Safety information Attention Please observe the following safety notices, before you commence with cleaning the device: ► The device must be cleaned at regular intervals and calcium deposits should be removed. ► Switch the device off prior to cleaning it and unplug the plug from the wall power outlet. ►...
5.3 Descaling The device has to be descaled regularly, otherwise the coffee taste will be affected and the scale deposits can damage the device. When the noise during brewing increases, or the brewing time is longer, or the device switches off before the water tank is empty, then these are indications that descaling is necessary.
6.1 Causes and rectification of faults Problem Possible solution Coffee brews too slowly (more than Descale the device (see chapter descaling) 10 minutes). Clean the grinding/brewing container and drip stop valve of The device switches off before water coffee residue. tank is empty.
8 Guarantee 12 Months Limited Warranty Caso Design USA warrants that for a period of 12 months from the date of purchase, this product will be free from defects in material and workmanship. Caso Design USA at its option, will repair or replace this product or any component of the product found to be defective during the warranty period.
Caso Design USA disclaims all other warranties, conditions, or representations, express implied, statutory or otherwise. Caso Design USA shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.