Table of Contents
Advertisement
3 Use introduction
3.1 Install the SIM card
Please keep the SIM card out of reach of children.
The SIM card may be damaged by any scratches and bends. So the SIM card
should be inserted、removed and stored with great care.
Before you remove the SIM card, please make sure the power is off and remove
the batteries.
3.2 Install the storage card
This mobile phone can use storage card, and please make sure the storage card
has been inserted into its proper position.
Warning： When the mobile phone is shaking， the srorage card may slip out of its
slot, and please do not bend or score storage card, and avoid it meeting static
electricity、dust or water.
Open the back cover of the phone and remove the battery, and then insert
the SIM card along its storage card slot direction with its mental surface
downwards, shut the lip。
3.3 Install the battery
1. Align the metallic contact place of battery with mental bump of battery jar,
press the battery inward in the direction of the flow arrow to the battery jar.
2. Restore the battery cover properly.
3.4 Remove the battery
Please turn off the phone first, push back the cover as illustrated to remove
the cover, finally remove the battery。
·After removing the battery, any settings and data existed on the SIM card and
the mobile phone may be lost.
·Please remove the battery with the mobile phone off, it's possible to generate
exception with your phone if remove battery when it is switched on.
3.5 Charge the battery
Open the soft dust cover of the attachment interface on the bottom cover,
insert the charging plug of the charger into the charging port of the phone and
the other end of the charged into power socket. If the mobile is on, the battery
icon will flicker in the upper right corner of the screen, representing charging
is in progress. When the icon stops flickering, it will indicate that the charging
is over. In the case that the phone charges with it on, the battery icon will
also flicker.
5
Advertisement
Table of Contents
