1. Manuals
  2. Brands
  3. HydroCare Manuals
  4. Water Dispenser
  5. O2 Hydro Well System
  6. Installation, use & care manual

HydroCare O2 Hydro Well System Installation, Use & Care Manual

Hide thumbs
1
2
3

Advertisement

Table of Contents

O
Hydro Well System
2
Installation, Use &
Care Guide
Tools & Parts Needed
■ Adjustable Wrench
■ Phillips Screwdriver
■ ¼" Nut Driver
■ 3/8" Nut Driver
■ Adapter from home pipe size
to 1" PVC if needed
1
4
8
11
Parts & Material Included
■ properly tighten all fittings to ensure a leak-free assembly.
■ the system should be located after the connection to the sprinkler system(s), and/or irrigation
line(s). These lines should be left untreated.
■ Install in a location that is not susceptible to freezing temperatures as damage to the equipment
could occur. Do not install where there is prolonged exposure from UV lights.
■ Install away from direct sunlight as prolonged exposure to ultra violet light can weaken plastic
components.
Unit should be installed in a well-ventilated area to avoid buildup of any airborne pollutants.
2
5
7
6
9
10

Installation Requirements

3

Parts and Materials

1. Main Control Head
2. Funnel
3. Drain Line
4. Bypass Valve
5. Silicone
6. Distributor Tube Cap
7. Power Cord Assembly
8. Surge Protector
9. Teflon Tape
10. Strainer Basket
11. Media Tank Distributer Tube
12. Media Package
(Not Shown)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the O2 Hydro Well System and is the answer not in the manual?

Questions and answers

Summary of Contents for HydroCare O2 Hydro Well System

  • Page 1 Hydro Well System Installation, Use & Care Guide Parts & Material Included Installation Requirements Tools & Parts Needed ■ properly tighten all fittings to ensure a leak-free assembly. ■ Adjustable Wrench ■ the system should be located after the connection to the sprinkler system(s), and/or irrigation ■...
  • Page 2 Assembly Instructions 1.) You have received a Vortech Tank that is built with the distributor tube installed. Leave the Distributer Tube Cap on and put the Funnel in place (See Figure 1). Pour in the Media Package. 2.) Remove funnel, wipe the mouth of the Media Tank, and remove the Distributer Tube Cap. Coat the outside of the Media Tank Distributer Tube with silicon from top edge and down 1”.
  • Page 3 Main Control Head. Make appropriate entries on the Maintenance Card provided (ie. date installed and dates medias are changed). Keep attached to the system and update when needed. The HydroCare Service Department can be reached Monday – Friday, from 9am – 4pm PST at 888-963-6178 or at www.hqhometek.com/solutions/water-solutions.

Table of Contents