Sanuvox SABER16/24-GM2 Installation Instructions

WARNING
Before installing or performing maintenance or service on
the purifier, turn off unit and disconnect from power source.
Electrical shock can cause injury or death. There may be
more than one disconnect switch.
__________________________
Never expose eyes or skin to ultraviolet light from any
source. The purifier MUST be DISCONNECTED from power
source before performing maintenance or service. Personal
injury may result.
__________________________
Do not touch lamp glass without gloves. Reduced
performance of lamp may result. Clean lamp after handling.
__________________________
The UV lamp contains a small quantity of mercury.
If a lamp breaks, clean and dispose of with care.
__________________________
Use only specified replacement lamps with your purifier.
Use of an incorrect lamp can result in damage to the purifier
and/or lamp.
__________________________
UV rays may destroy certain type of filters (polymer or
plastic), please keep units away from shinning directly on
plastic.
NOTICE
UV lamp can be disposed/recycled after use as for
any other fluorescent bulb.
Saber 24V Ultraviolet Lamp Magnet System
Follow all safety codes.
Wear safety glasses and work gloves.
PLEASE SAVE FOR YOUR RECORDS
Date Code#
Date Installed:
Installed By:
Installers Contact info.:
SANUVOX 24V UV LAMP SYSTEM
INSTALLATION INSTRUCTIONS
Model# SABER16/24-GM2