Advanced Setup (Bus Insert, Midi & Tuner) - KAHAYAN Proaudio 8x4 MIDI Selector Operator's Manual

ADVANCED SETUP
AMP BUS INSERT:
The 8x4 MIDI Selector allows you to insert an Amp Attenuator or a Speaker
Simulator. In this way, all the Amps and Speakers connected to the Selector
will be working thru this attenuator or speaker simulator. This insert opens
the bus amp and is located electronically in between amp power inputs and
speaker outputs of the Selector. The use of modern Speaker Simulator gives
you an extra analog or digital output to a DAW or other applications.
IMPORTANT NOTE: Before connect any attenuator unit all the Amps and
Selector must be turned off. The insert send and return must be properly
connected before turn on any amp. If not, the Selector may be damaged
internally. And also if the attenuator / speaker simulator load is erroneous or
damaged, the Selector may suffer internal damage.
AMP ATTENUATOR/
SPEAKER SIMULATOR
Jack charge Cable
MUTED TUNER OUTPUT:
The 8x4 MIDI Selector allows you to connect an external Tuner using the Jack
Output in the front panel. This Output only Works when you press the MUTE
TUNER switch. This is a useful mode to have a more clean pedal rig routing.
Also you can use this outuput to other functions: For example to connect in
cascade a second 8x4 selector unit, when you have a lot of Amps.
7