Advertisement
Digital Throttle:
The Gatekeeper Systems E7033 Digital Throttle transceiver is designed to be mounted
in the Gatekeeper Systems, Inc. Cart Manager. The Digital Throttle will operate with
Gatekeeper Systems CM Remote, Gatekeeper Systems wheels and responds to
Gatekeeper Systems status requests.
Digital Throttle connectors detail:
Power up Digital Throttle, by providing +12V DC power supply at connector block 1 pin
3 and grounding at connector block 1 pin 4.
While power up, LED bar will be ON to indicate Digital Throttle is in operating mode.
Connector Block 1 Definition:
Pin
1
2
3
4
5
6
7
RELAY 36V
8
Name
5V_OUT
HORN
12V IN
GND IN
RAW 36V
KEY 36V
POT LO
Description
+5V DC, 0.35A fused Output
6A fused HORN drive
Power Input
Power Grounding
Monitor the 36VDC batteries voltage input
Monitor a 36V DC Key Input
Monitor the status of the AC relay
Potentiometer low voltage input
Connector Block 1
Connector Block 2
Advertisement
