LaZee Tek LaZee Mouse Cursor Operating Instructions

Operating Instructions
LaZee Mouse™
Thank You for purchasing the LaZee Mouse™
Cursor! We hope you enjoy working with the
newest mouse technology available. We at LaZee
Tek strive to build quality products, and want you to
to be completely satisfied. LaZee Tek technical
support is available at (260) 705-0071 if you have
any problems with your LaZee Mouse.
System Requirements
Hardware: Available USB port
Software: - Microsoft Windows™ 8, 7, Vista,
XP, ME, 2000, or 98
-
MAC OSX™ 8.0 or above
-
Unix / Linux / Other
™
any using standard USB Drivers
-
Other compatible USB inputs
Setup Instructions
1. Begin with unpacking the LaZee Mouse™
package. Inside you should find:
a. LaZee Mouse™ Cursor
b. Headset
c. USB Cable
d. USB Extension
e. Standard Mounting Kit
f. Operating & Mounting Instructions
2. Connecting the cable(s) to the LaZee
Mouse™ Switch consists of:
For
CURSOR
a. Inserting a switch plug into the
3.5mm input jack on the LaZee
Mouse™ CURSOR. LaZee Tek
products use standard 1/8" / 3.5 mm
jacks. If your switch has a different
size plug, standard adapters are
readily available from numerous
electronic and department stores.
b. Inserting the Mini-B end of the USB
cable into the LaZee Mouse™ USB
port.
3. For initial usage of the LaZee Mouse, it is
recommended to reduce the mouse speed
settings of the computer, to a maximum
cursor travel speed of 5 sec from Left to
Right side of display. While changing these
mouse settings are very beneficial when first
attempting to operate a LaZee Mouse, it is
not a requirement. After the user has
become "familiar" with operating the LaZee
Mouse™ at the slower speed settings, they
can be gradually increased back to their
previous settings. The menu for adjusting
the mouse speed can be found:
Windows Start: Settings: Control Panel
Mouse: Pointer Options: Motion
220-H