Advertisement
Quick Links
`
1
RadioSecure SLM Operation Manual
V1.01
ENVOTECH NETWORK SDN BHD
(657306‐W)
25, Jalan Kilang 2, Kawasan Perindustrian Jelapang (Taman Pertama),
30100 Jelapang, Ipoh, Perak, Malaysia.
Tel: +605 527 8287 / +605 527 9287 Fax: +605 526 1287
Email: info@envotech.com.my Website: www.envotech.com.my
Advertisement
Summary of Contents for Envotech RadioSecure SLM
- Page 1 ` 1 RadioSecure SLM Operation Manual V1.01 ENVOTECH NETWORK SDN BHD (657306‐W) 25, Jalan Kilang 2, Kawasan Perindustrian Jelapang (Taman Pertama), 30100 Jelapang, Ipoh, Perak, Malaysia. Tel: +605 527 8287 / +605 527 9287 Fax: +605 526 1287 Email: info@envotech.com.my Website: www.envotech.com.my ...
-
Page 2: Hardware Contents
` 2 Hardware Contents: RadioSecure SLM Device Stainless Steel wire rope with header Horizontal bolt Locking Barrel Sim window cover ENVOTECH NETWORK SDN BHD (657306‐W) 25, Jalan Kilang 2, Kawasan Perindustrian Jelapang (Taman Pertama), 30100 Jelapang, Ipoh, Perak, Malaysia. Tel: +605 527 8287 / +605 527 9287 Fax: +605 526 1287 Email: info@envotech.com.my Website: www.envotech.com.my ... -
Page 3: Sim Card Installation
` 3 SIM Card installation RadioSecure SLM is delivered with SIM Window Cover unattached. User is to follow the following procedure to insert SIM and subsequent closing the window to retain the IP67. Check that Green Reset Plug is inserted and secured. - Page 4 Charging the RadioSecure SLM RadioSecure SLM is delivered with the battery charged to approximately 25%. Before deploying the RadioSecure SLM, make a full charge of the battery with an appropriate charger. (3hrs with 4amp rapid charger). To charge the battery, ...
- Page 5 Preparing RadioSecure SLM for deployment: RadioSecure SLM with fully charged battery is stored with reset plug inserted and securely tightens. The reset plug disconnects power supply to the CCA. The following procedure and visual observations should be observed in deploying the RadioSecure SLM.
- Page 6 ` 6 Unseal and Decommission the RadioSecure SLM To end journey, the following procedure and observation should be observed. 1. pull the horizontal bolt to left. 2. use a sharp bolt cutter to cut the bolt at the recess area.
- Page 7 ` 7 7. align green reset plug to the interface connector and gently pressed while turning clockwise. 8. the RadioSecure SLM has successfully completed an assignment and is in deep sleep. ENVOTECH NETWORK SDN BHD (657306‐W) 25, Jalan Kilang 2, Kawasan Perindustrian Jelapang (Taman Pertama), 30100 Jelapang, Ipoh, Perak, Malaysia. Tel: +605 527 8287 / +605 527 9287 Fax: +605 526 1287 ...
- Page 8 8 Maintaining the SLM RadioSecure SLM has a delicate Floating Mechanism which requires maintenance. Maintenance schedule shall depend on usage environment. It is advisable to carry out monthly maintenance for normal usage. Usage in dusty environment may require more frequent maintenance.
- Page 9 H-bolt, the locking cam will “bite” the cable resulting cable unable to be removed. To release the bite, push/pull cable downward, pull out H-bolt and then the cable. Spray lubricant into the cable inserting hole to remove metal filings. ENVOTECH NETWORK SDN BHD (657306‐W) 25, Jalan Kilang 2, Kawasan Perindustrian Jelapang (Taman Pertama), ...
- Page 10 FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the RadioSecure SLM and is the answer not in the manual?
Questions and answers