Summary of Contents for NexxTech 47-84” Tilt Large TV Mount
- Page 1 8008590A • TV size range: 47-84” • Maximum weight capacity: 60 kg/132 lbs • Maximum mounting pattern: 800mm x 600mm (31.4” x 23.6”) • Distance to the wall: 26mm 47-84” Tilt Large TV Mount INSTALLATION GUIDE...
- Page 2 Hardware Kit: Part 1 - Attaching plastic cover to wall plate...
- Page 3 Part 2a - Wood Stud Mounting With the wall plate (1) as a template, ensure it is level, and mark the six mounting holes along the centre lines of the wood stud. Drill six 5mm (3/16”) diameter holes 80mm deep. Level the wall plate (1) and secure to the wall using the six long bolts (G) and six washers (E) supplied. Tighten the screws firmly. Do not overtighten. Wood stud...
- Page 4 Part 2b - Concrete Wall Mounting With the wall plate (1) as a template, ensure it is level, and mark the six mounting holes. Drill six 10mm (3/8”) diameter holes 90mm deep. Insert the six anchors (H) into the holes and secure the wall plate using the six long bolts (G) and six washers (E) supplied. Tighten the screws firmly. Do not overtighten. Concrete wall...
- Page 5 Part 3a - Attaching brackets to TV screens with flat back Centre the brackets vertically on the back of the screen. Select the small (A, B1 or medium C) screws. Attach the brackets to the screen using the four selected screws and washers (D or E) at the top and bottom of each bracket. Tighten the screws firmly. Do not overtighten. Washer (D or E) Small hole for M6 and M8 screws Medium hole for M10 screws VESA Mounting Patterns: 800mm x 600mm, 800mm x 500mm, 800mm x 400mm, 800mm x 300mm, 700mm x 600mm, 700mm x 500mm, 700mm x 400mm, 700mm x 300mm, 600mm x 600mm, 600mm x 500mm, 600mm x 400mm, 600mm x 300mm, 600mm x 200mm, 500mm x 500mm, 500mm x 400mm, 500mm x 300mm, 500mm x 200mm, 400mm x 400mm, 400mm x 300mm, 400mm x 200mm, 300mm x 300mm, 300mm x 200mm, 200mm x 200mm, 200mm x 100mm...
- Page 6 Part 3b - Attaching brackets to TV screens with recessed back Centre the brackets vertically on the back of the screen. Select the large (B2) screws. Attach the brackets to the screen using the four selected screws, four washers (D), and four spacers (F) at the top and bottom of each bracket. Tighten the screws firmly. Do not overtighten. Part 4 - Mounting the flat panel screen Hook the top of the brackets (2) onto the top Wall Wall ridge of the wall plate (1). Then gently swing the screen down. NOTE: Always use an assistant or mechanical lifting equipment to safely lift and position heavy equipment.
- Page 7 1. Press down on the brackets once it is 2. Gently swing the TV to install the installed on the wall plate, it will lock in cables after you have unlocked the place. brackets from the wall plate. 3. When you need to take the TV 4. The locking strings can be cut if they down, first pull down on the two strings are too long and hang below the display. together to unlock the brackets from the wall plate.
- Page 8 THE SOURCE – WARRANTY Imported by: The Source, Barrie, Ontario, Canada, L4M 4W5 Manufactured in China For product support please visit www.thesource.ca © 2016 The Source All rights reserved. Please Recycle...