F.I.T. F.I.T. PRO LED2500 FLARE Manual

F.I.T. PRO LED2500 FLARE
Underwater Video Light
Function Specification
Luminance White Dispersed Light 2500Lumen, White Spot 1000Lumen,
Red Light 200Lumen, UV 9W
Angle Wide 120° , Spot 15°, Red 120°, UV 120°
Battery Li-Ion 32650
Burn Time Wide(1hr), Spot(2.5hr), Red(5hr), UV(5hr)
Depth Rating 100m/330ft
LED Spec White CREE XM-L U2x5pcs Color Temp 5700~7000K
Red CREE XP-E N3x2pcs Wavelength 620nm UV 365nm
LED Life 50000 hours
Material Aircraft grade aluminum
Coating Hard Anodized
Dimention Φ50x124.8mm
Weigth 220g（incl battery）
Mode White dispersed, White Spot, Red, UV, Battery Indicator
Low Battery Indicator/Protection, Overheating Protection
Special Wrong battery electrode protection
Packaging Contents
①Light ②32650 Li-Ion ③Charger ④O Ring 2pcs ⑤Grease
Please read carefully before use.
PRODUCT INTRODUCTION
F.I.T. PRO LED2500 (FLARE) is a 2500 lumens Underwater Video Light.
Construction
Button①
Light Head
Ball/YS Holder
UV Bulb(3LED)
White LED(Wide)(4LED)
White LED(Spot)(1LED)
OPERATING INSTRUCTIONS
Installing the battery
1. Insert the battery as shown in the picture.
2. Make sure the battery is facing the correct direction
3. Align the battery compartment to the light head and close
★ Note：Turn the battery compartment till it is fully close to
prevent flooding
Turning ON/OFF
1. ON: With the light facing forward，depress button① to turn on
the light（Default Mode: 100% white dispersed light）
2. OFF: From any mode，depress button① and hold for 2secs to
turn the light off
Overheating Protection:
The LED will automatically adjust the light output to a lower
acceptable level when high temperature is detected. This is to
prevent the LED from being burnt and damaged.
Button②
Power Inmdicator
Lanyard point
Red(2LED)