Parts Diagram; Before First Use - Russell Hobbs RHIM10 Instructions And Warranty

PARTS DIAGRAM

BEFORE FIRST USE

Before using your appliance for the first time, remove the appliance from the box and take
off any protective wrappings.
REMEMBER: DO NOT LEAVE PROTECTIVE PACKAGING LYING AROUND, AS IT
COULD BE DANGEROUS AROUND INFANTS.
OPERATING INSTRUCTIONS
1. After removing all interior and exterior packaging materials, use hot water to clean the
aluminium bowl and top lid of the ice cream maker before use.
2. Please correctly connect the input connector clip of the adaptor into the ice cream
maker then insert the power plug into the power socket. Make sure the power socket
is 100~240 V 50/60Hz.
3. Pour all the ingredients into the bowl of the ice cream maker, stir them well and ensure
the lid is closed properly.
4. Press the button of the desired consistency and allow approximately two hours of
operation (this will be dependent on the consistency required and the ingredients
used), then once the ice cream maker beeps it is ready.
5