Summary of Contents for Cooper Instruments & Systems DTW 750
- Page 1 Digital Torque Gage DTW 750 User’s Guide www.cooperinstruments.com PH: 540-349-4746 • FAX: 540-347-4755...
- Page 2 CONTENTS ..........................1 LIST OF EQUIPMENT ...........................1 GENERAL OPERATION ......................2 SELECTING MEASURING MODES ...........2 PROGRAMMING (TO EXIT PROGRAMMING AT ANY TIME PRESS OFF) .................2 STORING AND RECALLING DATA FROM MEMORY ......................3 CLEARING DATA FROM MEMORY ......................3 DOWNLOADING MEMORY DATA ..........................3 AUTO POWER OFF ............
- Page 3 List of Equipment 1. Torque Tester with 3/8” drive 2. CW one-way clutch 3. AC adapter/charger Read First: Safety Information For safety, and for damage avoidance, be sure to read this manual thoroughly. The warranty is only valid when the product is used following the instructions provided within this manual. •...
- Page 4 Selecting Measuring Modes Press ON/OFF to turn on. Hold CLR/PRG for more than 4 seconds. Display cycles GO, PP, PD or C. Select the desired measuring mode, which becomes the default mode. Press CLR/PRG to display the measuring mode. GO (Real Time) display torque transient (no output). PP (Peak) Capture peak torque (peak data output).
- Page 5 Clearing Data from Memory 1. Single clear: When a memory value is displayed, press CLR/PRG, then “CLR” displays and blinks 3 times. Press CLR/PRG switch again before “CLR” stops blinking and the memory value is erased. 2. All clear: Press CLR/PRG and DOWN simultaneously until “ALL” is displayed. While “ALL” is blinking, press CLR/PRG again.
- Page 6 Dimensions WARRANTY REPAIR POLICY Limited Warranty On Products Any Cooper Instruments product which, under normal operating conditions, proves defective in material or in workmanship within one year of the date of shipment by Cooper will be repaired or replaced free of charge provided that a return material authorization is obtained from Cooper and the defective product is sent, transportation charges prepaid, with notice of the defect, and it is established that the product has been properly installed, maintained, and operated within the limits of rated and normal usage.
Need help?
Do you have a question about the DTW 750 and is the answer not in the manual?
Questions and answers