JVC LT-37X688 Service Manual page 20

4.5.3 DESCRIPTION OF STATUS DISPLAY
4.5.3.1 TV-MICRO SERVICE MODE
SETTING ITEM No. SETTING ITEM
S001 R DRIVE S001 R DRIVE
NTSC3 FULL STD LOW NTSC3 FULL STD LOW
SIGNAL SYSTEM SCREEN SIZE VIDEO STATUS
(1) SIGNAL SYSTEM
The signal displayed on the screen is displayed.
NTSC3 : 525i (Composite / S-video input)
525I : 525i (Component input)
525P : 525p
1125I6 : 1125i
750P : 750p
PCVGA : PC (VGA)
PCXGA : PC (XGA)
H525I : HDMI 525i
H525P : HDMI 525p
H750P : HDMI 750p
H125I6 : HDMI 1125i
H125P6 : HDMI 1125p
D525I : ATSC 525i
D525P : ATSC 525p
D125I6 : ATSC 1125i
(2) SCREEN MODE
FULL : FULL
1609 : CINEMA, CINEMA ZOOM
PANO : PANORAMA, HD PANORAMA
REGU : REGULAR, SLIM
JUST : FULL NATIVE
1-20 (No.YA535)
SETTING VALUE (DATA)
137 137
WHITE BALANCE
(3) VIDEO STATUS
STD : STANDARD
DYN : DYNAMIC
TH : THEATER
GAME : GAME
(4) WHITE BALANCE
HIGH : HIGH
LOW : LOW
(5) SETTING ITEM NAME
Setting item name are displayed. The setting item numbers to
be displayed are listed below.
Setting items
Video system setting
(Not used)
(Not used)
(Not used)
(Not used)
(Not used)
(6) SETTING ITEM NO.
Setting item numbers are displayed. For the setting item
names to be displayed, refer to "Initial setting value of
adjustment mode".
(7) SETTING VALUE (DATA)
The SETTING VALUE is displayed.
CHANGE AND MEMORY OF SETTING VALUE
SELECTION OF SETTING ITEM
• [CH+] / [CH-] key.
Change the setting items up/ down.
S001... ↔ T001... ↔ M001... ↔ F001... ↔ D001... ↔ Z001...
• [SLEEP TIMER] key.
Switches to the next items.
S001 → T001 → M001... → F001... → D001 → Z001
CHANGE OF SETTING VALUE (DATA)
• [VOL+] / [VOL-] key.
Change the setting values up/down.
MEMORY OF SETTING VALUE (DATA)
Changed setting value is memorized by pressing [MUTING]
key.
Settings Item No.
Adjust S001 - S009
Fixed T001 - T003
Fixed M001 - M224
Fixed F001 - F002
Fixed D001
Fixed Z001