Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Apigy Manuals
  4. Locks
  5. TRON201
  6. Installation manual

Apigy TRON201 Installation Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
LET'S GET STARTED
INSTALLATION GUIDE

Advertisement

loading
Need help?

Need help?

Do you have a question about the TRON201 and is the answer not in the manual?

Questions and answers

Summary of Contents for Apigy TRON201

  • Page 1 LET’S GET STARTED INSTALLATION GUIDE...
  • Page 2 THANK YOU. We’re incredibly excited to bring Lockitron Bolt to your door. If you need any help with setup, please reach out to us at support@lockitron.com. We’re happy to assist via FaceTime or Google Hangouts to diagnose any issues. You can also find plenty of helpful tips online at help.lockitron.com or the Lockitron Community which can be found at community.lockitron.com.
  • Page 3 https://lockitron.com/install START WITH THE INSTALL VIDEO: LOCKITRON.COM/INSTALL There you’ll find the Lockitron Bolt installation video as well as other videos that assist with troubleshooting common problems.
  • Page 4 Lockitron Cylinder Front Tailpiece + Cylinder Screwdriver Lockitron Bolt Tapered Latch AA Batteries Strike Plate Mounting Plate 2x Mounting Plate Screws 2x Lockitron Bolt Screws 4x Wood Screws PREPARATION We’ve included everything you need to get Lockitron Bolt set up. If your door has difficulty closing easily or problems locking due to misalignment, you’ll want to diagnose and remedy those issues for best Lockitron Bolt...
  • Page 5 IS LOCKITRON BOLT COMPATIBLE? Any deadbolt is easily swapped with Lockitron Bolt. You can verify compatibility at lockitron.com/compatibility. Interconnected locks need to be entirely removed and a replacement door handle will need to be installed (not included). Mortise locks are not drop-in compatible with Lockitron Bolt.
  • Page 6 1. UNSCREW THUMB TURN Most deadbolts have two Phillips head screws holding the thumb turn in place (some might have an additional set of two screws under the thumb turn which also need to be removed). A few deadbolts require an Allen Key (also known as a hex key) to remove the thumb turn.
  • Page 7 2. REMOVE OLD CYLINDER Remove the old lock cylinder from the front of your door. Tip: Certain models of Schlage deadbolts can be adapt- ed to work with the internal portion of Lockitron Bolt. Use all included Lockitron Bolt components except for the cylinder and thumb turn screws which you should re-use from your Schlage lock.
  • Page 8 3. REMOVE EXISTING LATCH Remove the two screws holding the latch in place. Depending on how your latch was originally installed, it may or may not slide out easily. Tip: If your old latch is difficult to remove, you can use the screwdriver to carefully pull it out.
  • Page 9 4. VERIFY DOOR PREP You should now be all set to install Lockitron Bolt! If your door’s holes (or “prep”) don’t appear similar to the one above, you might need to make adjustments. Tip: If your old latch had rounded corners, as shown above, you might need to use a hammer and chisel to remove a small amount of material and square off the recess.
  • Page 10 5. REMOVE EXISTING STRIKE PLATE On the frame of your door, locate and remove your existing strike plate.
  • Page 11 6. INSTALL NEW STRIKE PLATE Screw in the new strike plate. Tip: Strike plate alignment is very important to ensure that Lockitron Bolt locks and unlocks smoothly. If you have significant weather stripping, you might need to pull your door closed to ensure Lockitron Bolt can lock and unlock properly.
  • Page 12 7. INSTALL NEW TAPERED LATCH With the latch in the unlocked position and the arrow pointing up, slide it into the side of the door prep and screw into place. Looking through the door prep, verify that the cross of the latch is centered vertically in the prep.
  • Page 13 8. HOLD LOCK CYLINDER IN PLACE Before installing the lock cylinder the latch should be in the unlocked position. Make sure the tailpiece is rotated fully counter-clock- wise if you’re installing Bolt on the right hand side of the door (“right handed”, shown above) or fully clockwise if you’re install Bolt on the left side of the door (“left handed”).
  • Page 14 9. VERIFY LOCK CYLINDER ALIGNMENT Holding the cylinder in place, make sure that the key- hole is at the bottom of the cylinder. Once in the right position, we recommend using a piece of painters tape to hold the cylinder in place.

  • Page 15: Install Mounting Plate

    10. INSTALL MOUNTING PLATE Place the mounting plate over the tailpiece on the inside of the door. Feed the mounting plate screws through the plate, latch and into the cylinder. Make sure both screws catch in the cylinder before fully tightening.
  • Page 16 11. VERIFY LOCK TAILPIECE ALIGNMENT Turn the tailpiece to lock and unlock the latch to ensure that your tailpiece alignment is correct. If not, return to step 6. Tip: When looking at the door straight on from the edge, make sure that the front cylinder and mounting plate are level.
  • Page 17 12. INSTALL LOCKITRON BOLT With the latch in the unlocked position, match Lockitron Bolt’s thumb turn to the correct direction. Install the two mounting screws for Lockitron Bolt. Tip: If you’re installing Bolt on the right side of the door (“right handed”...

  • Page 18: Install Batteries

    13. INSTALL BATTERIES Insert each battery above the battery ribbon in the alternating directions indicated. The battery ribbon can be used to easily and quickly remove all the batteries. After inserting the last battery you should hear a boot up chime from Lockitron Bolt. Tip: If you install the batteries without the ribbon behind them, we recommend using the screwdriver to carefully pry the batteries out.
  • Page 19 14. SET HANDEDNESS If your door is right-handed (shown) and Bolt is mount- ed on the right side of the door, press and hold the right button for three seconds until you hear a beep. Alternatively if your door is left-handed (Bolt is mount- ed on the left side of the door), press and hold the left button.
  • Page 20 15. SLIDE BATTERY COVER INTO PLACE Slide the battery cover on, ensuring that the tab at the bottom slots into Lockitron Bolt. Turn Lockitron Bolt by hand with the door closed and and verify that the latch is not catching on anything. If it “sticks”...
  • Page 21 16. DOWNLOAD THE LOCKITRON APP Download the Lockitron app via the Apple App Store or Google Play Store. If you’ve already created a Lockitron account, tap “Log In”, otherwise select “Create Account” to get started. Tap “Setup new Device” and you will be guided through associating your Lockitron with your account.

  • Page 22: Update Firmware

    17. UPDATE FIRMWARE We recommend checking to see if the firmware on your Bolt needs updating after installation. To do this go to the Settings tab for your Lockitron and visit the Update Firmware section.
  • Page 23 Lockitron 18. ENJOY LOCKITRON! The future is here - it’s just not very evenly distributed. - William Gibson Congratulations, you now own a piece of the future! Take a look at our troubleshooting section that follows if something isn’t right. You can also drop us a line at support@lockitron.com or search for common issues at help.lockitron.com.

  • Page 24: Tips And Troubleshooting

    TIPS & TROUBLESHOOTING BOLT WON’T TURN ...by hand: The tailpiece of the lock cylinder is rotated in the wrong direction or wasn’t turned fully to the correct orientation before installation. Return to Step 8 and ensure that the tailpiece is rotated in the correct direction..from the app: Ensure that Lockitron Bolt is powered up - remove and replace a battery, then listen for the boot up...
  • Page 25 TIPS & TROUBLESHOOTING HOW TO RESET THE CLUTCH If Lockitron Bolt is having trouble completely locking or unlocking, you might need to reset the internal clutch. To do this, simply hold the thumb turn in the locked or unlocked position while sending either command to change state.
  • Page 26 TIPS & TROUBLESHOOTING LOW BATTERY Lockitron Bolt will indicate a low battery status with an audible three beep alert after locking or unlocking. When you receive this alert you should replace Bolt’s batteries as soon as possible. USING SENSE™ Sense allows you to quickly unlock your door as you return home.
  • Page 27 TIPS & TROUBLESHOOTING USING BOLT AND A LOCKING HANDLE Keep in mind that the Lockitron app can only control Lockitron Bolt. This means if you have a locking door handle that is accidentally locked, you will be unable to open the door even if Lockitron Bolt is unlocked. We recommend replacing a locking handle with a non-locking handle when frequently sharing access with guests who might accidentally lock the handle.
  • Page 28 SETTING UP BRIDGE If you also have the optional Bridge device, you can set it up once your Lockitron Bolt is up and running. Make sure that you’ve installed Lockitron Bolt first. Tap the “Setup New Device” button in the mobile app. Tip: If Bridge is not automatically detected you can manually enter the serial number from the bottom side.
  • Page 29 SETTING UP BRIDGE Select the correct network and enter the password. You may need to manually type in the network name (case sensitive). Tip: Bridge will only work on 2.4ghz B/G/N WiFi networks. Tap continue to BlinkUp and hold your phone’s screen so that it covers the hole on the bottom of the Bridge unit.

  • Page 30: Warranty And Disclosures

    In performing warranty service, Apigy, Inc. may provide replacement parts on an exchange basis and replaced parts will become the proper- ty of Apigy, Inc. Replacement parts provided by Apigy, Inc. will be new or refurbished and of comparable quality, and may be a different part that contains compatible features and functions.
  • Page 31 WARRANTY AND DISCLOSURES REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUS- TOMER AND THERE SHALL BE NO LIABILITY ON THE PART OF APIGY, INC. FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE.