Advertisement
Quick Links
ASSEMBLY COMBINATIONS
Additional parts may be required and are available at shop.openh.io
Stacking Kit (88-002A) shown
HARDWARE INCLUDED
M3 L35 TF x4
M3.5 L6 TF x4
M3 L5 x4
M2.5 L6 TF x4
M2.5 L5 x8
11 MM STANDOFF x4
7 MM STANDOFF x4
STAR WASHER x16
RUBICON QUICKSTART GUIDE
Congratulations on your purchase of the Rubicon
Starter Kit! Use this quick start guide to get up
and running as fast as possible.
Go to openh.io/build for assembly videos.
Spare or replacement parts are available at
shop.openh.io
Starter Kit Contents:
·
1 x Shell (11-001A)
2 x Cover (11-004A)
·
1 x Base plate (12-001A-N)
·
1 x Gasket Kit (87-001A)
·
1 x Stacking Screws Kit (18-006A-K4)
·
·
1 x Board Stacking Standoff Kit (87-012A-116B)
1 x Board Mounting Standoff Kit (87-012A-
·
072B)
1 x Rubicon Shell Screw Pack (87-003A)
·
Open Hardware Industries, LLC. 2017 Rev 05L
Advertisement
Summary of Contents for OpenH RUBICON
- Page 1 ASSEMBLY COMBINATIONS RUBICON QUICKSTART GUIDE Additional parts may be required and are available at shop.openh.io Stacking Kit (88-002A) shown Congratulations on your purchase of the Rubicon Starter Kit! Use this quick start guide to get up and running as fast as possible.
- Page 2 6. Place the cover on top. Screw in 4 M3.5 L6 TF TF screws where indicated. screws from the Rubicon Shell Screw Pack. Skip this 3. Place the shell on the base plate with side A step if stacking an additional shell.
- Page 3 HOLE GUIDE AND MOUNTING TEMPLATE (P/N: 12-001L REV L PLATE) PLATE AND HEATSINK INSTALLATION GUIDE P/PZ/Q PH/Q PH/Q P/PZ P/PZ PA/PZ PA/PZ PH/PZH PH/PHZ P/N: 12-001L PA/PZ PA/PZ PH/PHZ/Q PH/PZH/Q P/N: 88-004A 1:1 scale drawing for use as template Open Hardware Industries, LLC. 2017 Rev 05.L P = Raspberry Pi mounting hole (using frame) PZ = Raspberry Pi Zero mounting hole B = BeagleBone mounting hole...
- Page 4 Add one thermal pad to the top of the INSTALLATION ACCESSORY INSTALLATION heatsink. Go to openh.io/build for video instructions Between steps 2 and 3 of the Heatsink Accessory Installation guide, insert the Quasar 1. Trim bosses in and header. Complete the remaining steps of the order to fit the Heatsink Accessory Installation guide.