nomad NM30110A00 User Manual

User manual
TESLA MODEL 3 WIRELESS CHARGER
Model: NM30110A00
An overview
This is a dual-channel QI wireless charger specially developed for tesla 3
electric vehicles. It can be used to wirelessly charge apple phone 8, X,
samsung and other android phones with QI wireless charging function, and
can simultaneously charge 2 phones. With two - way charging status indication.
The product has the appearance design exquisite, the function is novel, the
security is reliable, the function is practical, the use is convenient and so on.
The built-in 3.7v /6000mAh lithium battery recharges to ensure that the internal
battery can be fully charged at the same time after charging two phones can
reach the maximum charging input. The input voltage and current of QI
charging can reach up to 5V/2A X2 and the charging and discharging of the
battery is 5V/2A. It has the functions of overload, overcurrent, short circuit and
overvoltage protection.
Instructions
1. Insert two USB charging cables into the USB socket socket of tesla 3 car
first, and then put the product in the USB charging rack in front of tesla to open
the USB power on the car. Then place the phone with QI charging function
directly in the center of the left or right side cover of the product, and place the
center of the phone as far as possible on the left or right side of the cover. For
example, for a small screen phone like apple 8 and X(when the device is not
equipped with a protective case), place the phone pad card at the bottom and
then charge the phone
2. Charging instructions: orange will light up when the phone is charged, and
white will light up when the samsung phone is fully charged
3. Intelligent protection function: with overcurrent, overload and short circuit
protection function, to ensure product safety
Technical parameters
1. Input voltage current of USB charging is 5V/1A+1A
2. Output voltage and current: QI output 5V/2A
3. Input interface: USB A plug;
4. Output interface: QI wireless
5. Internal battery charging current voltage is 5V/2A
5. Size: ODmm;
Matters needing attention
• Please read the following notes carefully before using this product and keep
them for future reference.