DAY 6 PlotWatcher Pro Manual page 15

If the camera is not ready to record, the status line will give one of the
following messages:
Message
Start on MM/DD/YYYY
Skip until HH:MM AM/PM
Start at Dawn
Start at HH:MM AM/PM
Disk Full – Cannot Start
The bottom two lines of the status page show the amount of remaining storage
(7.4 Gb Free in the example) on your memory card, the proportion of battery
life remaining in the active battery bank, and the time and date. Note that
when the storage space falls to 0.1 Gb, the oldest TLV file, (even if it is the only
one), will be deleted, and a new file created.
Condition
Camera is waiting on a user specified
"start delay" to expire, and will begin
recording on the date shown.
Camera is in a Mid-day Skip period and
indicates the time of day it will restart
recording.
Camera is in "Light Based" mode and has
detected that it is too dark to operate.
Camera is in "Time Based" mode and is
not currently schedule to run.
Shown when the camera initializes with
less than 0.1 Gb of free space.
www.Day6Outdoors.com Page 15