Table of Contents
Advertisement
Quick Links
Introduction
The Bluetooth headset Bone Muve Acoustics; EVPKE is a portable hand free communication
device with A2DP profile built on Bluetooth wireless technology. This headset is designed and
manufactured in accordance with Bluetooth specification VR4.1
frequency hopping and allows faster connection, the noise immunity within the wireless area
network is better than the BT V2.1 Headset
Audio cable
Product standard
Bluetooth version：V4.1
Talk tine:：up to 18hours
Standby time：up to 600 hours
Battery standard：Rechargeable lithium polymer battery 430mah
Power adapter output: DC5V 300mA
Charging the headset
Your headset uses a rechargeable battery,you must charge
The battery fully before using the headset for the first time.
1. Plugging the charging cable in the USB charge port
2. The rde indicator lamp remains solid when charging.
3. The fully charging takes1.5 hours
4. The white indicator lamp goes out and the blue indicator
remains solid when charging completed
5. Battery Check: Music mode >
6. Enable multipoint: Pairing mode> detection once
7. Disable multipoint: Pairing mode >detection once
8. Factory Reset: 1) Plug in charger cable into USB port.
2) Hold MFB for 4 seconds. White 2 times @ Blee and 2 long beep.
3) The headset paired device list and users are all cleared.
User Manual
MA-1999
Multifunction
button (MFB)
detection once
which supports adaptive
Multifunction
button (MFB)
LED
Detection button
USB
Microphone
1
Advertisement
Table of Contents
Related Manuals for MUVEACOUSTICS EVPKE MA-1999
Summary of Contents for MUVEACOUSTICS EVPKE MA-1999
- Page 1 User Manual MA-1999 Introduction The Bluetooth headset Bone Muve Acoustics; EVPKE is a portable hand free communication device with A2DP profile built on Bluetooth wireless technology. This headset is designed and manufactured in accordance with Bluetooth specification VR4.1 which supports adaptive frequency hopping and allows faster connection, the noise immunity within the wireless area network is better than the BT V2.1 Headset Multifunction...
- Page 2 Power on/off the headset a. To power on: Off mode > Hold MFB 4s Steady Blue for 1 sec b. To power off: Any mode > Hold MFB 4s Steady White for 1 sec Voice Prompt a. When the headset is on, there will be the automatic voice prompt: power on b.
- Page 3 2. Connect to 2 devices at the same time a. Press multifunction button for 6 seconds the headset into pair status. Blinking in blue and red alternatively b. Set the phone to search for Bluetooth device. c. When phone finds headset confirm by selecting” Muve Acoustics; EVPKE” from list..
- Page 4 : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the EVPKE MA-1999 and is the answer not in the manual?
Questions and answers