Advertisement
Charge
When the earbuds indicator flashes red or has no response,
charge your earbuds. Normal charging takes about 2 hours.
1.
The LED indicator lights red when charging and turns
blue when fully charged.
2.
Unplug the charging cable when the earbuds are fully
charged.
Pairing
1.
Press and hold the
pairing mode. The LED indicator flashes red and blue as
your earbuds searches for Bluetooth-enabled devices.
2.
On your device, turn on the Bluetooth function, and set it
to search for Bluetooth devices.
3.
Select and connect to Ncredible Earbuds from the list
of found devices. When paired, the LED Indicator flashes
blue every 4 seconds and the earbuds enters standby
mode.
Note: If your Bluetooth-enabled device is out of connection
range and disconnects, move back within 5 minutes to
reconnect automatically.
Changing Bluetooth Devices
Your earbuds automatically reconnects to the most recently
paired device when it is powered on.
To pair a new device, you must disconnect the current
device's Bluetooth functions first. See your Bluetooth device's
instructions for details.
º
button for 4 seconds to enter
3
Advertisement
