Babel Buster X2 User Manual page 4

The LON Device expands out to the detail shown below when a device number is clicked. At
first this page is also empty. You will go through a series of 4 steps to get the page
populated as shown below. In this example, we are "learning" about an AddMe II.
Step 1: Click the "Get Service Pin" button. Node status will show "Waiting for service pin."
Now press the service button (or install button) on the device you want to learn. Click the
Update button, and status will return to "ok" if the message was received. In addition,
Neuron ID and Program ID will now have non-zero numbers. (If you don't have physical
access to the device but do know its Neuron ID, you can type it into the list on the
LON Devices page.)