Download Print this page

SpeedAngle GMOS JI100S Quick Manual

A smart 10 hz gps lap timer with lean angle measurement

Hide thumbs Also See for GMOS JI100S:

Table of Contents

Need help?

Do you have a question about the GMOS JI100S and is the answer not in the manual?

Page 2 GMOS JI100S QUICK GUIDE Dashboard Unit Location Best No, unless with external antenna Installing Bracket With 3M Dual Lock tape Apply the included tape to the back of the bracket, and adhere the bracket to a pre- ferred location. Keep the SA logo right side up.
Page 3: Installing Sensor
Installing Sensor 1. Find a plane on either side of the bike frame that 2. Avoid any place that may move, turn, or vibrate is parallel to the longitudinal center line of the bike too much, such as handle bar, bike tail, or fairing. and vertical to the ground.
Page 4: Device Overview
Timer mode / Drive mode DEVICE, YOU AGREE TO ASSUME ALL RISK AND depending on which mode you used last time. RESPONSIBILITY SPEEDANGLE RIDER You can press any key to skip. RELATED TO ITS USAGE. RN:S1234567 WWW.SPEEDANGLE.COM Screen Overview There are two modes available: Drive mode for street cruising and Timer mode for timing.
Page 5: Timer Mode
Windows displays “This device is ready for use”. Sometimes this may take a few minutes. Launch SpeedAngle R4 and click on MENU --> TOOLS --> LOG DOWNLOADER to open the Download dialog. For more information, please watch the tutorial videos on the download webpage.