3B SCIENTIFIC Hall Effect Basic Apparatus Instruction Manual

3B SCIENTIFIC ® PHYSICS
Hall Effect Basic Apparatus 1009934
Instruction manual
10/15 ALF
1 Decoupled measurement outputs (4-mm-safety
sockets)
2 Earth socket
3 Power supply input, 12 V AC/3A
4 4-mm plugs for insertion into supplied U-shaped
holder
5 Trimmer for sample current
6 Sample fixture
The equipment conforms to safety regulations for
electrical measuring instruments and control and
laboratory equipment as per DIN EN 61010, part 1
and is designed to conform to protection class 3. It
is intended for use in dry rooms which are suitable
for the use of electrical equipment.

If the equipment can no longer be operated
without hazards arising, it should immediate-
ly be withdrawn from use.

Do not expose the equipment to high humidity,
7 Measurement outputs, 4-mm safety sockets
8 Trimmer for Hall voltage compensation
9 Trimmer for temperature
10 Decoupled measurement outputs (8-pin mini-
DIN sockets)
11 Display
12 Fixture for magnetic field sensor
13 Buttons for changing display
1. Safety instructions
extreme temperatures or severe shocks.

Before using the equipment, read the in-
struction manual in order to avoid damage to
the equipment or injury to users.
The board with the sample can become very hot
when in operation (170°C) so that there is a risk of
burns.

Before removing the circuit board, allow it
sufficient time to cool.
1