Summary of Contents for ST-Lab U-810
- Page 1 USB 3.1 Type-C to Hub + Gigabit Ethernet Docking Station User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners.
-
Page 2: Table Of Contents
Contents: Chapter 1: Introduction ......3 1.1 Product Introduction ............ 3 1.2 Features ................ 3 1.3 System Requirements ..........5 1.4 Package Contents ............5 1.5 Hardware Description ..........6 Chapter 2: Getting Started ......8 2.1 Hardware Installation ..........8 2.2 Driver Installation ............ -
Page 3: Chapter 1: Introduction
Chapter 1: Introduction 1.1 Product Introduction This USB 3.1 Type-C to Hub + Gigabit Ethernet Docking Station let you get the fastest way to connect up to USB 3.0 devices quickly and easily. It built-in three USB 3.0 Super-Speed ports, and it also integrated with a single RJ-45 Ethernet networking port. - Page 4 Compatible with USB Specification, Revision 2.0 LEDs indicate the status of Power status and Ethernet connection USB 3.0 Hub Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices Up to 5Gbps data transfer rate ...
-
Page 5: System Requirements
Supports jumbo frame 1.3 System Requirements Windows® 7/8 (32/64 bit); Mac OS X 10.6/10.7/10.8 Available USB Type-C port 1.4 Package Contents 1 x USB 3.1 Type-C to Hub + Gigabit Ethernet Docking Station 1 x USB 3.1 Type-C to Micro-B Cable ... -
Page 6: Hardware Description
1.5 Hardware Description Figure 1. Front Page 6... - Page 7 Figure 2. Back LED Indications: : Power On Indicator turns on when the Docking Stations is powered up : Ethernet Link/Activity Indicator turns on steadily when network link is established; Flashing when network activity is in progress Page 7...
-
Page 8: Chapter 2: Getting Started
Chapter 2: Getting Started 2.1 Hardware Installation 1. Plug the power adapter into the power jack of the USB 3.1 Type-C to Hub + Gigabit Ethernet Docking Station. (If power adapter is available) 2. Connect the Notebook/PC and Docking Station with USB 3.1 Type-C to Micro B cable. -
Page 9: Driver Installation
2.2 Driver Installation Note: There is no additional driver for USB 3.0 Hub. Drivers for USB 3.0 Hub are always supplied with drivers for USB 3.0 host controllers, and are provided by your USB 3.0 host controller vendor. The following section shows you how to install the Docking Stations Gigabit Ethernet driver on different operating systems. - Page 10 Note: If the install program doesn’t run automatically, please locate and double-click on the Autorun.exe file in the CD to launch the install program. Please click “USB 1000M”. *Note: Actual image may vary Please click “USB 3.0 1000M” to start the installation. *Note: Actual image may vary Page 10...
-
Page 11: Installation For Mac Os X
Follow the instructions on screen to install the driver. 2.2.2 Installation for Mac OS X Insert the provided CD into your CD-ROM drive. Double-click the “Ethernet Adapter” disc icon, double-click “Drivers” folder. *Note: Actual image may vary Double-click “USB 1000M” folder, and then double click the “USB 3.0 1000M”... - Page 12 *Note: Actual image may vary Follow the instructions on screen to install the driver. After driver installation is complete, you must restart your computer. Page 12...
-
Page 13: Hardware Verify
2.3 Hardware Verify 2.3.1 Verifying for Windows Click on the “Device Manager” tab in the Windows Control Panel. Start > Control Panel > Device Manager Entry “Network adapters” item, and you can read “ASIX AX88179 USB 3.0 to Gigabit Ethernet Adapter” in the Device Manager. -
Page 14: Verifying For Mac Os X
2.3.2 Verifying for Mac OS X Choose About this Mac from the Apple menu. Click on More Info… In the Contents sidebar select USB from the Hardware section. Scroll the list to reveal the USB 3.1 Type-C to Hub + Gigabit Ethernet Docking Station information Page 14...
Need help?
Do you have a question about the U-810 and is the answer not in the manual?
Questions and answers