Bistos BT-410 Operation Manual

Bistos BT-410 Operation Manual

Head-worn light
Hide thumbs Also See for BT-410:

Advertisement

BT-410
Head-worn light
Operation Manual
BT-410
Keep this manual for future reference
P/N : 410-ENG-OPM-EUR-R07

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BT-410 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bistos BT-410

  • Page 1 BT-410 Head-worn light Operation Manual BT-410 Keep this manual for future reference P/N : 410-ENG-OPM-EUR-R07...
  • Page 2 However, no responsibility is assumed by Bistos Corporation. For its use or any infringements of patents or other rights of third parties, that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Bistos Corporation.
  • Page 3: Table Of Contents

    BT-410 Operation Manual Table of Contents Safety …………………………………………………… Instructions for the Safe Operation and Use of the BT-410 .……… Warnings ……………………………………………………… Cautions .…………………………………………………… Definitions of Symbols ………………………………………… Introduction .…………………………………………… General ………………………………………………………… Brief Device Description ……………………………………… Intended Use .………………………………………………… Contraindication .………………………………………………...
  • Page 4: Safety

    Observe all precautions to ensure the safety of the patient and those near the instrument.  Do not attempt to service the BT-410. Only qualified service personnel should attempt any needed internal servicing. WARNING: Identifies conditions or practices that might present danger or possible injury to the patient and/or user.
  • Page 5: Cautions

    The equipment should Do not disjoint or disassemble not be connecting to the the equipment. power while used. BISTOS Co., Ltd. does not May cause it may cause take responsibility of it. damage to equipment P/N:410-ENG-OPM-EUR-R07 Bistos Co., Ltd.
  • Page 6: Definitions Of Symbols

    BT-410 Operation Manual Definitions and Symbols - Symbols on the device & package Symbol Description Stand-by This symbol identifies a safety note. Caution is necessary when operating the device or control in order to avoid undesirable consequences. Manufacturer information Serial number...
  • Page 7: Introduction

    BT-410 Operation Manual Section 2 Introduction General This chapter provides a general description of the BT-410 monitor including:  Brief Device Description  Product Features  Model Configurations Brief Device Description This Head-worn light is used for medical examination by fixing it on the head and illuminating with condensed light to the injured part.
  • Page 8: Product Features

     Operation is very simple, so the unit is easy to use. Product Configuration BT-410 system consists of the following elements. Open the packaging contains the following accessories, please check. Also check for any damage to your console and accessories, please check.
  • Page 9: Assembly And Operation

    BT-410 Operation Manual Section 3 Assembly and Operation The overall panel The overall panel Fig. 1.1 ① ② Headband height adjustable part Headband part ③ ④ Headband size adjustable part Protect band ⑤ ⑥ Power On/Off Button LED indicator ⑦...
  • Page 10: Loupe (Optional) Assembly

    BT-410 Operation Manual Loupe (Optional) Assembly BT-410 turn in front of our parts is assembled in the loupe. Please assemble in the order shown below. Loupe assembled with optional Main body < > Fig. 1.2 Loupe (Optional) Assembly P/N:410-ENG-OPM-EUR-R07 Bistos Co., Ltd.
  • Page 11: Astral Lamp (Optional) Assembly

    BT-410 Operation Manual Astral Lamp (Optional) Assembly BT-410 is located at the bottom of the astral lamp and pay off the lens cap from the bottom up by assembly. In order to assemble the picture below. Fig. 1.3 Astral Lamp(Optional) Assembly P/N:410-ENG-OPM-EUR-R07 Bistos Co., Ltd.
  • Page 12: Use Method

    BT-410 Operation Manual Section 4 Use Method Adjustable headband The height and size adjustable headband part call the user's head to adjust the Head- worn light is worn Turn on the power Method Once the power switch button pressed remains locked in. When he turned on the light from the light source occurs.
  • Page 13: Charging Method

    BT-410 Operation Manual Charging Method There are two ways of battery operations such as separation of battery pack and its un-separation (However, the equipment must be powered off to charge the battery, un-separated.) Please refer to the below, as shown simply in order of how to separate the battery.
  • Page 14: Charger Operation

    BT-410 Operation Manual Charger operation Normal 100 ~ 240 Vac, 50 / 60 Hz outlet, connect the charger to the red light illuminates when charging fire red orange suspension changed, when the fire turns green fire. Fault In case of the below situations, recharging function might be defective.
  • Page 15: Maintenance And Cleanliness

    BT-410 Operation Manual Section 5 Maintenance and Cleanliness Checking the Light Intensity It is recommended that the intensity of the light be checked before each use, and at least every six months. Have a qualified technician test the intensity level and readjust the intensity potentiometers to achieve the desired output, if required.
  • Page 16: Troubleshooting

    Connect the service center to operates headlight for less capacity. replace battery pack. than 2 hours. ※ If you have not resolved the problem with breast pump or you have further questions, please contact Bistos customer center. P/N:410-ENG-OPM-EUR-R07 Bistos Co., Ltd. 2018,03...
  • Page 17: Specifications

    BT-410 Operation Manual Section 7 Specifications BT-410 Head-worn light Specifications: Main body Dimensions: (L) 303 mm × (H) 165.00 mm × (D) 195.00 mm Illumination Standard : 30,000 lx (at 25 cm working distance) / 50,000lx (with astral lamp) Optional Main body : 15,000lx ~ 30,000 lx (at 25 cm working distance)
  • Page 18 BT-410 Operation Manual Input : AC 100 ~ 240 Vac, 50 / 60 Hz Output : DC 4.2 V, 1000 mA Charging time : 4 hours Power consumption : 3.15 VA Environmental Operating Temperature: 10°C to 40°C (50°F to 104°F)
  • Page 19: Manufacturer's Declaration On Emc

    Manufacturer’s Declaration on EMC 8.1 Electromagnetic emissions The BT-410 is intended for use in the electromagnetic environment specified below. The customer or the user of the BT-410 should assure that it is used in such an environment. Electromagnetic environment Emissions test...
  • Page 20 BT-410 Operation Manual 8.2 Electromagnetic immunity Immunity test IEC 60601 Compliance level Electromagnetic Test level environment guidance Electrostatic ±6 kV Contact ±6 kV Contact Floors should be wood, discharge (ESD) concrete or ceramic ±8 kV air ±8 kV air tile.
  • Page 21 RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the BT-410 is used exceeds the applicable RF compliance level above, the BT-410 should be observed to verify normal operation.
  • Page 22 8.3 Recommended separation distances between portable and mobile RF communications equipment and the BT-410 The BT-410 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the BT-410 can help prevent...
  • Page 23: Product Guarantee

    Sales Agency Manufacture Bistos Co., Ltd ※ Thank you for purchasing BT-410. ※ This product is manufactured and passed through strict quality control and inspection. ※ Compensation standard concerning repair, replacement, refund of the product complies with “Framework Act on Consumers” noticed by Fair Trade Commission of Republic of Korea.

Table of Contents