Advertisement
Fleck 5600 & 2510 12 Day Timer Easy Programming Guide
Final Steps:
Once your control valve is set to run, clip the stainless steel bypass to the inlet/outlet.
Next, turn the central dial clockwise into backwash and slightly turn the bypass valve into service. After
a few minutes you can fully open the bypass valve into service.
This helps maintain a controlled flow of water into your media tank. Once your tank is fully saturated,
turn the central dial back to in service.
If you have any questions, feel free to give Aqua Science a call at 800-767-8731 or send us an email
through our website at www.aquascience.net.
800-767-8731
www.aquascience.net
4
Advertisement
