Zeon PLAYBOY CE2463PB Instructions For Use

MODEL NO. CE2463PB
WATER DISPENSER
Instructions For Use
The Mini bottle and dispenser should be rinsed clean before
each use.
Installation of the Liquid Container –
Remove any water retained from the main unit dispenser.
Fill up the bottle container with preferred beverage.
Remove the wastage dispenser from the main unit.
Turn the main unit upside down and carefully place it over the
bottle container.
Place both hands securely over the top and bottom of the unit and
carefully turn the whole unit in upright position.
To dispense liquid, simply press the soft tap on top of the
Water Outlet.
After filling, you may place bottle in refrigerator to cool the
contents before dispensing. If cold drinks are required for
longer periods, freeze the bottle with contents (without the
cap) and as it melts, you can dispense.
This item contains a Cup Holder at the back side of the unit.
© 2005 Playboy.
PLAYBOY and RABBIT HEAD DESIGN are
marks of Playboy and used under license
by Zeon Ltd, UK.